Sony VPL-FX40L Operating Instructions - Page 36
The Installation Menu
UPC - 027242710436
View all Sony VPL-FX40L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
The Installation Menu The Installation menu is used for changing the settings of the projector. Lamp Mode Standard ID Mode All Illumination Direct Power On Setting items V Keystone Image Flip Lamp Mode Lens Control IR Receiver Functions Initial setting Corrects the vertical trapezoidal distortion of the picture. 0 When the bottom of the trapezoid is longer than the top ( ): Sets a lower value (- direction) When the top of the trapezoid is longer than the bottom ( ): Sets a higher value (+ direction). Flips the picture on the screen horizontally and/or Off vertically. Use this item for installation for the backside projection or ceiling installation. • HV: Flips the picture horizontally and vertically. • H: Flips the picture horizontally. • V: Flips the picture vertically. • Off: The picture does not flip. Sets the lamp brightness used during the projection. • High: Illuminates the projected image brightly. • Standard: Reduces fan noise and power consumption. The brightness of the projected image will be lower compared with the "High" setting. Standard Avoids any operation of the lens such as "Focus," "Zoom," On and "Shift," by mistake. When set to "On," you can adjust the projection lens using "Focus," "Zoom," and "Shift." After you make this adjustment, it is recommended that you set this item to "Off" to avoid any operation of the lens. When set to "Off," the FOCUS, ZOOM and SHIFT keys do not work. Selects the remote control detectors (IR Receiver) on the front and rear of the projector. • Front & Rear: Activates both the front and rear detectors. • Front: Activates the front detector only. • Rear: Activates the rear detector only. Front & Rear 36 The Installation Menu