Sony VPL-FX40L Operating Instructions - Page 45

Remote Commander, Others, Indicators

Get Sony VPL-FX40L - XGA LCD Projector PDF manuals and user guides
UPC - 027242710436
View all Sony VPL-FX40L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Remote Commander Symptom Cause and Remedy The Remote Commander does not work. • The Remote Commander batteries are dead. c Replace them with new batteries (see page 15). • The COMMAND ON/OFF switch is set to OFF. c Set it to ON. • The ID number of the projector assigned in "ID Mode" in the Installation menu does not match the ID number of the ID MODE keys on the Remote Commander. c Assigns the same ID number to the projector and the Remote Commander, or set "ID Mode" in the Installation menu to "All." Others Symptom The control panel keys do not function. The fan is noisy. Cause and Remedy The control panel keys are locked. c Unlock the control panel keys (see page 35). c Check the setting of "Cooling Setting" in the Setup menu (see page 32). c Check the ventilation holes are not blocked. c Make sure the room temperature is not too high. To maintain the product reliability of the projector's components, the rotation speed of the fan increases and the fan becomes slightly noisier, when the room temperature exceeds normal. The approximate normal temperature is 25°C. Indicators Symptom Cause and Remedy The LAMP/COVER • The lamp cover or the air filter cover is detached. indicator flashes in orange. c Attach the cover securely (see pages 41 and 42). (Repetition rate of 2 flashes) The LAMP/COVER indicator flashes in orange. (Repetition rate of 3 flashes) • The lamp has reached the end of its life. c Replace the lamp (see page 40). • The lamp has reached a high temperature. c Wait for 60 seconds to cool the lamp and then turn on the power again. ON/STANDBY flashes in red. (Repetition rate of 2 flashes) • The internal temperature is unusually high. c Check to see that nothing is blocking the ventilation holes. • The projector is being used at a high altitude. c Ensure that "Cooling Setting" in the Setup menu is set to "On." ON/STANDBY flashes in The fan is broken. red. (Repetition rate of 4 c Consult with qualified Sony personnel. flashes) ON/STANDBY flashes in red. (Repetition rate of 6 flashes) Unplug the AC power cord from the wall outlet after the ON/ STANDBY indicator goes out, plug the power cord to the wall outlet, and then turn the projector on again. If the ON/STANDBY flashes in red and the problem persists, the electrical system has failed. c Consult with qualified Sony personnel. Others Troubleshooting 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
45
Troubleshooting
Others
Remote Commander
Others
Indicators
Symptom
Cause and Remedy
The Remote Commander
does not work.
• The Remote Commander batteries are dead.
c
Replace them with new batteries (see page 15).
• The COMMAND ON/OFF switch is set to OFF.
c
Set it to ON.
• The ID number of the projector assigned in “ID Mode” in the
Installation menu does not match the ID number of the ID MODE
keys on the Remote Commander.
c
Assigns the same ID number to the projector and the Remote
Commander, or set “ID Mode” in the Installation menu to “All.”
Symptom
Cause and Remedy
The control panel keys do
not function.
The control panel keys are locked.
c
Unlock the control panel keys (see page 35).
The fan is noisy.
c
Check the setting of “Cooling Setting” in the Setup menu (see
page 32).
c
Check the ventilation holes are not blocked.
c
Make sure the room temperature is not too high.
To maintain the product reliability of the projector’s components,
the rotation speed of the fan increases and the fan becomes
slightly noisier, when the room temperature exceeds normal. The
approximate normal temperature is 25°C.
Symptom
Cause and Remedy
The LAMP/COVER
indicator flashes in orange.
(Repetition rate of 2
flashes)
• The lamp cover or the air filter cover is detached.
c
Attach the cover securely (see pages 41 and 42).
The LAMP/COVER
indicator flashes in orange.
(Repetition rate of 3
flashes)
• The lamp has reached the end of its life.
c
Replace the lamp (see page 40).
• The lamp has reached a high temperature.
c
Wait for 60 seconds to cool the lamp and then turn on the power
again.
ON/STANDBY flashes in
red. (Repetition rate of 2
flashes)
• The internal temperature is unusually high.
c
Check to see that nothing is blocking the ventilation holes.
• The projector is being used at a high altitude.
c
Ensure that “Cooling Setting” in the Setup menu is set to “On.”
ON/STANDBY flashes in
red. (Repetition rate of 4
flashes)
The fan is broken.
c
Consult with qualified Sony personnel.
ON/STANDBY flashes in
red. (Repetition rate of 6
flashes)
Unplug the AC power cord from the wall outlet after the ON/
STANDBY indicator goes out, plug the power cord to the wall
outlet, and then turn the projector on again. If the ON/STANDBY
flashes in red and the problem persists, the electrical system has
failed.
c
Consult with qualified Sony personnel.