Sony VPL-FX40L Operating Instructions - Page 47

Specifications - vpl specifications

Page 47 highlights

Specifications Optical characteristics Projection system 3 LCD panels, 1 lens, 3 primary color shutter system LCD panel VPL-FE40: 0.79-inch SXGA+ panel, 4,410,000 pixels (1400 × 1050 × 3) VPL-FX40: 0.79-inch XGA panel, 2,359,296 pixels (1024 × 768 × 3) Lens 1.3 times zoom lens (powered) f 30.6 to 39.7 mm/F1.66 to 2.18 * The lens is not supplied with the VPL-FE40L/FX40L. Lamp 275 W Ultra high pressure lamp Projected picture size 40 to 600-inches (measured diagonally) (When the VPLL- 1008 is used: 60 to 300-inch) Light output 4000 ANSI lumen (When the Lamp Mode is set to "High.") Throwing distance for VPL-FE40/FX40 (When placed on the floor.) When an SXGA+ (VPL-FE40)/ XGA (VPL-FX40) signal is input 40-inch: 1.5 to 1.9 m (4.9 to 6.2 feet) 60-inch: 2.3 to 2.9 m (7.4 to 9.5 feet) 80-inch: 3.0 to 3.9 m (9.9 to 12.7 feet) 100-inch: 3.8 to 4.8 m (12.5 to 15.9 feet) 120-inch: 4.6 to 5.8 m (15.0 to 19.1 feet) 150-inch: 5.7 to 7.3 m (18.8 to 23.9 feet) 200-inch: 7.7 to 9.7 m (25.2 to 32.0 feet) 300-inch: 11.6 to 14.6 m (37.9 to 48.0 feet) 400-inch: 15.4 to 19.5 m (50.6 to 64.1 feet) 500-inch: 19.3 to 24.4 m (63.3 to 80.2 feet) 600-inch: 23.2 to 29.4 m (76.0 to 96.3 feet) There may be a slight difference between the actual value and the design value shown above. Electrical characteristics Color system NTSC3.58/PAL/SECAM/ NTSC4.43/PAL-M/PAL-N/ PAL60 system, switched automatically/manually (NTSC4.43 is the color system used when playing back a video recorded in NTSC on a NTSC4.43 system VCR.) Resolution VPL-FE40: 750 horizontal TV lines (Video input) 1,400 × 1,050 dots (RGB input) VPL-FX40: 750 horizontal TV lines (Video input) 1,024 × 768 dots (RGB input) Acceptable computer signals1) fH: 19 to 92 kHz fV: 48 to 92 Hz (Maximum input signal resolution: UXGA 1600 × 1200 fV: 60 Hz) 1) Set the resolution and the frequency of the signal of the connected computer within the range of acceptable preset signals of the projector. Applicable video signals 15 k RGB 50/60 Hz, Progressive component 50/60 Hz, DTV (480/60i, 575/50i, 480/60p, 575/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p), Composite video, Y/ C video Speaker Stereo speaker system, 40 × 70 mm (1 5/8 × 2 7/8 inches) Speaker output 1.8 W × 2 Input/Output VIDEO IN VIDEO: phono type Composite video: 1 Vp-p ±2 dB sync negative (75 ohms terminated) S VIDEO: Y/C mini DIN 4-pin type Y (luminance): 1 Vp-p ±2 dB sync negative (75 ohms terminated) C (chrominance): burst 0.286 Vp-p ±2 dB (NTSC) (75 ohms terminated), burst 0.3 Vp-p ±2 dB (PAL) (75 ohms terminated) AUDIO: phono type × 2 rated input 500 mVrms, input Others Specifications 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58

47
Specifications
Others
Specifications
Optical characteristics
Projection system
3 LCD panels, 1 lens, 3 primary
color shutter system
LCD panel
VPL-FE40: 0.79-inch SXGA+
panel, 4,410,000 pixels (1400 ×
1050 × 3)
VPL-FX40: 0.79-inch XGA panel,
2,359,296 pixels (1024
×
768 ×
3)
Lens
1.3 times zoom lens (powered)
f 30.6 to 39.7 mm/F1.66 to 2.18
*
The lens is not supplied with the
VPL-FE40L/FX40L.
Lamp
275 W Ultra high pressure lamp
Projected picture size
40 to 600-inches (measured
diagonally) (When the VPLL-
1008 is used: 60 to 300-inch)
Light output
4000 ANSI lumen
(When the Lamp Mode is set to
“High.”)
Throwing distance for VPL-FE40/FX40 (When
placed on the floor.)
When an SXGA+ (VPL-FE40)/
XGA (VPL-FX40) signal is
input
40-inch: 1.5 to 1.9 m
(4.9 to 6.2 feet)
60-inch: 2.3 to 2.9 m
(7.4 to 9.5 feet)
80-inch: 3.0 to 3.9 m
(9.9 to 12.7 feet)
100-inch: 3.8 to 4.8 m
(12.5 to 15.9 feet)
120-inch: 4.6 to 5.8 m
(15.0 to 19.1 feet)
150-inch: 5.7 to 7.3 m
(18.8 to 23.9 feet)
200-inch: 7.7 to 9.7 m
(25.2 to 32.0 feet)
300-inch: 11.6 to 14.6 m
(37.9 to 48.0 feet)
400-inch: 15.4 to 19.5 m
(50.6 to 64.1 feet)
500-inch: 19.3 to 24.4 m
(63.3 to 80.2 feet)
600-inch: 23.2 to 29.4 m
(76.0 to 96.3 feet)
There may be a slight difference between the
actual value and the design value shown above.
Electrical characteristics
Color system
NTSC
3.58
/PAL/SECAM/
NTSC
4.43
/PAL-M/PAL-N/
PAL60 system, switched
automatically/manually
(NTSC
4.43
is the color system used
when playing back a video
recorded in NTSC on a
NTSC
4.43
system VCR.)
Resolution
VPL-FE40: 750 horizontal TV
lines (Video input)
1,400 × 1,050 dots (RGB input)
VPL-FX40: 750 horizontal TV
lines (Video input)
1,024
×
768 dots (RGB input)
Acceptable computer signals
1)
fH: 19 to 92 kHz
fV: 48 to 92 Hz
(Maximum input signal resolution:
UXGA 1600
×
1200
fV: 60 Hz)
1)
Set the resolution and the frequency of the
signal of the connected computer within the
range of acceptable preset signals of the
projector.
Applicable video signals
15 k RGB 50/60 Hz, Progressive
component 50/60 Hz, DTV
(480/60i, 575/50i, 480/60p,
575/50p, 720/60p, 720/50p,
1080/60i, 1080/50i, 1080/60p,
1080/50p), Composite video, Y/
C video
Speaker
Stereo speaker system, 40
×
70
mm (1
5
/
8
×
2
7
/
8
inches)
Speaker output
1.8 W × 2
Input/Output
VIDEO IN
VIDEO: phono type
Composite video: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type
Y (luminance): 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst
0.286 Vp-p ±2 dB (NTSC)
(75 ohms terminated),
burst 0.3 Vp-p ±2 dB (PAL)
(75 ohms terminated)
AUDIO: phono type × 2
rated input 500 mVrms, input