Sony VPL VW10HT Operating Instructions - Page 11
Control panel - filter
UPC - 027242565180
View all Sony VPL VW10HT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Control panel 0 LAMP/ COVER TEMP/ FAN POWER SAVING ON/ STANDBY MENU PATTERN ENTER RESET LIGHT INPUT VIDEO MEMORY 1 2 3 9 8765 4 1 I / 1 (on / standby) key Turns the projector on and off when the projector is in the standby mode. The ON/STANDBY indicator lights in green when the power is turned on. When turning off the power, press the I / 1 key twice following the message on the screen, or press and hold the key for about one second. For details on steps for turning off the power, see "To turn off the power" on page 20 (GB). 2 INPUT key Selects the input signal. Each time you press the key, the input signal switches as follows: B VIDEO B S-VIDEO INPUT-B b INPUT-A b 3 VIDEO MEMORY key You can adjust the image in advance and store the setting in the VIDEO MEMORY 1 to 6. You can recall the setting by pressing this key. Pressing this key selects memory number 1 through 6, and then starts again with 1. You can easily set, change and view the image in a suitable setting. For more details on how to set the video memory, see the VIDEO MEMORY of the INPUT SETTING menu on page 25 (GB). 4 LIGHT key If you press this key while the power is on, the keys on the control panel will be displayed in orange. Press this key again to turn off the light. The light will turn off automatically if no keys are operated for 30 seconds. 5 PATTERN key Displays the test pattern on the screen for focus adjustment. Press again to clear the test pattern. 6 RESET key Resets the value of an item back to its factory preset value. This key functions when the menu or a setting item is displayed on the screen. Location and Function of Controls 7 ENTER key Enters the settings of items in the menu system. 8 MENU key Displays the on-screen menu. Press again to clear the menu. 9 Arrow keys (M/m/