Sony VPL VW10HT Operating Instructions - Page 22
Contrast, Bright, Color, Sharp, Rgb Enhancer, D. Dynamic Picture, Color Temp, Color Sys System, Drc-
UPC - 027242565180
View all Sony VPL VW10HT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
The PICTURE CTRL Menu The PICTURE CTRL Menu The PICTURE CTRL (control) menu is used for adjusting the picture. Unadjustable items depending on the input signal are not displayed in the menu. When the video signal is input PICTURE CTRL CONTRAST: 80 BRIGHT: 50 COLOR: 50 HUE: 50 SHARP: 50 D.PICTURE: ON COLOR TEMP: LOW COLOR SYS: AUTO DRC-MF: DRCx4 VIDEO When the RGB signal is input PICTURE CTRL CONTRAST: 80 BRIGHT: 50 RGB ENHANCER: 30 COLOR TEMP: LOW INPUT-A CONTRAST Adjusts the picture contrast. The higher the setting, the greater the contrast. The lower the setting, the lower the contrast. BRIGHT Adjusts the picture brightness. The higher the setting, the brighter the picture. The lower the setting, the darker the picture. COLOR Adjusts color intensity. The higher the setting, the greater the intensity. The lower the setting, the lower the intensity. HUE Adjusts color tones. The higher the setting, the picture becomes greenish. The lower the setting, the picture becomes purplish. SHARP Adjusts the picture sharpness. The higher the setting, the sharper the picture. The lower the setting, the softer the picture. RGB ENHANCER Adjusts the picture sharpness when the computer signals are input. The higher the setting, the sharper the picture. The lower the setting, the softer the picture. D. (Dynamic) PICTURE Emphasizes the black color. ON: Emphasizes the black color to produce a bolder "dynamic" picture. OFF: Reproduces the dark portions of the picture accurately, in accordance with the source signal. COLOR TEMP Adjusts the color temperature. HIGH: Makes the white color bluish. LOW: Makes the white color reddish. COLOR SYS (System) Selects the color system of the input signal. AUTO: Automatically selects one of the following signals: NTSC , 3.58 PAL, SECAM, NTSC4.43. PAL-M/N: Automatically selects one of the following signals: PAL-M/PAL-N, NTSC3.58. Normally, set to AUTO. If the picture is distorted or colorless, select the color system according to the input signal. DRC-MF Smoothes out a large size video image. DRC × 4: Doubles the number of the video signal scanning lines and the number of horizontal pixels, resulting in quadrupled image quality. DRC PROGRESSIVE: Displays a clear line or characters without line flickering. 22 (GB)