Sony VPL VW10HT Operating Instructions - Page 19
To correct the trapezoid, Changing the aspect, The picture size for the screen size - video projector
UPC - 027242565180
View all Sony VPL VW10HT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
To correct the trapezoid When the projecting image is a trapezoid, change the projector's position/height by moving the adjuster. For details on "How to use the adjuster", see page 10 (GB). If the image is still a trapezoid, correct it in DIGIT KEYSTONE in the INSTALL SETTING menu. When the base edge is longer than the upper edge as shown in the figure below: Set the value to negative. When the upper edge is longer than the base edge as shown in the figure below: Projecting 4 Make setting or adjustment on an item. For details on setting individual items, see page 24 (GB). The picture size for the screen size Refer to the following for selecting the aspect. When the 4:3 picture is displayed on the 16:9 screen Example: The 120 inch screen is used. 2,656 1,494 Set the value to positive. Note If "ZOOM", "FULL" or "NORMAL" have been selected in the ASPECT of the INPUT SETTING menu, you can change the trapezoid. For details on "DIGIT KEYSTONE", see page 28 (GB). Changing the aspect You can change the aspect according to the video signal. For details on the menu screen operation, see "Using the Menu" on page 21 (GB). 1 Press the MENU key to display the menu. 2 Press the M or m key to select INPUT SETTING menu, then press the , or ENTER key. 3 Press the M or m key to select ASPECT, then press the , or ENTER key. INPUT SETTING ASPECT: VIDEO MEMORY: VIDEO FULL FULL THROUGH NORMAL NORMAL THROUGH ZOOM SUBTITLE WIDE ZOOM VIDEO/60 1,992 The 98 inch picture is displayed Size (Inch) 90 16:9 screen Unit (mm) 1,992 1,121 4:3 picture Unit (mm) Size (Inch) 73 1,494 1,121 110 2,435 1,370 90 1,826 1,370 120 2,656 98 1,494 1,992 1,494 19 (GB)