Sony VPL VW10HT Operating Instructions - Page 20
To turn off the power, About the air filter cleaning - performance
UPC - 027242565180
View all Sony VPL VW10HT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Projecting When the 16 : 9 picture is displayed on the 4 : 3 screen Example: The 120 inch screen is used. 2,438 1,371 1,829 Size (Inch) 80 The 110 inch picture is displayed. 4:3 screen 16:9 picture Unit (mm) 1,626 Unit (mm) Size (Inch) 73 1,219 1,626 914.6 100 2,032 1,524 2,032 120 2,438 1,829 2,438 1,143 91 110 1,371 Notes on changing the aspect This projector provides you with the various choices of aspects. When changing the aspect, check the following: • Select an aspect taking into account that one which changes the aspect ratio of the original picture will provide a different look from that of the original image. • Also note that if the projector is used for profit or for public viewing, modifying the original picture by switching aspects may constitute an infringement of the rights of authors or producers which are legally protected by laws. 20 (GB) To turn off the power To turn off the power from the control panel 1 Press the I / 1 key on the control panel. "Power OFF?" appears on the screen. Note The message will disappear if you press any key except the I / 1 key, or if you do not press any key for five seconds. 2 Press the I / 1 key. The ON/STANDBY indicator flashes in green and the fan continues to run for about 120 seconds to reduce the internal heat. Also, the ON/STANDBY indicator flashes quickly for the first 40 seconds. During this time, you will not be able to turn the power back on with the I / 1 key. 3 Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red. When you cannot confirm the on-screen message When you cannot confirm the on-screen message in a certain condition, you can turn off the power by holding the I / 1 key for about one second. To turn off the power from the Remote Commander 1 Press the 1 key on the Remote Commander. 2 Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red. Note Do not unplug the AC power cord while the fan is still running; otherwise, the fan will stop although the internal heat is still high, leading to breakdown of the projector. About the air filter cleaning Clean the air filter every 300 hours to ensure optimal performance.