Sony VPL VW10HT Operating Instructions - Page 37
Others, Warning messages, Caution messages - resolution
UPC - 027242565180
View all Sony VPL VW10HT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Troubleshooting Others Symptom The LAMP/COVER indicator flashes. The LAMP/COVER indicator lights up. Cause The lamp cover or the air filter cover is detached. The lamp has reached the end of its life. The lamp becomes a high temperature. The TEMP/FAN indicator flashes. The fan is broken. The TEMP/FAN indicator lights up. The internal temperature is unusually high. Both LAMP/COVER and The electric system failed. TEMP/FAN indicators light up. Remedy Attach the cover securely (see pages 34 (GB) and 35 (GB)). Replace the lamp (see page 34 (GB)). Wait for 120 seconds to cool down the lamp and turn on the power again (see page 20 (GB)). Consult with qualified Sony personnel. Check to see if nothing is blocking the ventilation holes. Consult with qualified Sony personnel. Warning messages Use the list below to check the meaning of the messages displayed on the screen. Message High temp.! Lamp off in 1 min. Frequency is out of range! Please check INPUT-A setting. Please check INPUT-B setting. Please replace the LAMP. Meaning Remedy Internal temperature is too high. This input signal cannot be projected as the frequency is out of the acceptable range of the projector. The resolution setting of the output signal of a computer is too high. Turn off the power. Check to see if nothing is blocking the ventilation holes. Input a signal that is within the range of the frequency. Set the setting of output to the XGA (see page 16 (GB)). You have input RGB signal from the computer when INPUT-A in the SET SETTING menu is set to COMPONENT, DTV YPBPR or DTV GBR. You have input RGB signal from the computer when INPUT-B in the SET SETTING menu is set to COMPONENT, DTV YPBPR or DTV GBR. It is time to replace the lamp. Set INPUT-A correctly (see page 27 (GB)). Set INPUT-B correctly (see page 27 (GB)). Please replace the lamp. Caution messages Use the list below to check the meaning of the messages displayed on the screen. Message NO INPUT Not applicable! Meaning No input signal You have pressed the wrong key. Remedy Check connections (see page 15 (GB) and 16 (GB)). Press the appropriate key. 37 (GB)