Sony XAV C1 Instructions Manual - Page 54
Sound, Operation, The display items do not scroll.
UPC - 027242693678
View all Sony XAV C1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Troubleshooting Sound There is no sound/sound skips/ sound cracks. • A connection has not been made correctly. • Check the connection to the connected equipment, and set the input selector of the equipment to the source corresponding to this unit. • The disc is dirty, flawed, or deteriorated. • The unit is installed at an angle of more than 30°. • The unit is not installed in a sturdy part of the car. • The unit is in fast-forward or fast-reverse mode. • The settings for the outputs are not made correctly. • Adjust DVD output level (page 35). • The volume is too low. • The position of the fader control (FAD) is not set for a 2-speaker system. • Att is set. Press ATT to release the Att setting or press VOL +/-. Sound is noisy. Keep cords and cables away from each other. Operation The remote does not function. • There are obstacles between the remote and the unit, or the remote receptor. • The distance between the card remote commander and the unit is too far. • The card remote commander is not pointed at the remote sensor, or the receptor on the unit properly. • The batteries in the card remote commander are weak. The operation buttons do not function. Press the Reset button (page 9). The menu items cannot be selected. The menu item of the function that is not available is shown in grey. The disc will not eject. Press and hold Z (eject) for two seconds. No beep sound. • The beep sound is cancelled (page 35). • The built-in amplifier is not used. The contents of the memory have been erased. • The Reset button has been pressed. , Store again into the memory. • The power connecting lead or battery has been disconnected. • The power connecting lead is not connected properly. The display items do not scroll. • For discs with so many characters, those may not scroll. • "A.Scroll" is set to off. , Set "A.Scroll On" (page 22). The disc cannot be loaded. • Another disc is already loaded. • The ignition key switch of the car is set to the OFF position. 54