Stihl 009 Instruction Manual - Page 30
Xholqj
View all Stihl 009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
This engine is certified to operate on unleaded gasoline and oil with the mix ratio 50:1. Your two-stroke engine requires a mixture of brand-name gasoline and quality two-stroke engine oil with the Use regular branded unleaded gasoline with a minimum octane rating of 90 ROZ (U.S.A./Canada: pump octane min. 89!). If the octane number of the regular grade gasoline in your area is lower, use premium unleaded fuel. Fuel with a lower octane rating may result in preignition (causing "pinging") which is accompanied by an increase in engine temperature. This, in turn, increases the risk of piston seizure and damage to the engine. The chemical composition of the fuel is also important. Some fuel additives not only detrimentally affect elastomers (carburetor diaphragms, oil seals, fuel lines etc.), but magnesium castings as well. This could cause running problems or even damage the engine. For this reason it is essential that you use only branded fuels! Use only STIHL two-stroke engine oil or equivalent branded two-stroke aircooled engine oils with the classification TC for mixing. We recommend STIHL 50:1 two-stroke engine oil since it is specially formulated for use in STIHL engines. Do not use BIA or TCW (two-stroke water cooled) mix oils! Take care when handling gasoline. Avoid direct contact with the skin and avoid inhaling fuel vapour (see "Safety Precautions"). The canister should be kept tightly closed in order to avoid any moisture getting into the mixture. The fuel tank and the canister in which fuel mix is stored should be cleaned from time to time. MIX Only mix sufficient fuel for a few days work, not to exceed 3 months of storage. Store in approved safety fuel-canisters only. When mixing, pour oil into the canister first, and then add gasoline. Before fueling, clean the fuel filler cap and the area around it to ensure that no dirt falls into the tank. Always thoroughly shake the mixture in the canister before fueling your machine. Gasoline US gal. 1 2 1/2 5 Oil (STIHL 50:1 or equivalent branded TC oils) US fl.oz 2.6 6.4 12.8 In order to reduce the risk of burns or other personal injury from escaping gas vapor and fumes, remove the fuel filler cap carefully so as to allow any pressure build-up in the tank to release slowly. Dispose empty mixing-oil canisters only at authorized disposal locations. After fueling, tighten fuel cap by hand. Use a suitable tool (e.g. screwdriver end of combination wrench) to tighten slotted fuel caps.