Stihl 009 Instruction Manual - Page 34
Wduwlqj
View all Stihl 009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Chain brake engaged Top: Center: Bottom: Stop switch away from Choke slide on - cold start Starting throttle position 1 2 125BA013 LA 125BA012 LA 125BA014 LA Before starting your saw, make sure you have a firm foothold and check that the saw chain is not touching the ground or any other obstacles. Bystanders must be kept well clear of the general work area of the saw. 3 1. Engage the chain brake by pushing the hand guard towards the bar nose. 2. Move stop switch away from . 3. If engine is cold, move choke slide to . This also applies if the engine has been running but is still cold. If engine is warm, move choke slide away from . 6 4. Set throttle trigger to start position by pressing the safety throttle lock , throttle trigger and starting 5 throttle lock in that order. Then let go of throttle trigger first and then the starting throttle lock . 4 125BA016 LA