Stihl 009 Instruction Manual - Page 49
Specifications
View all Stihl 009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Specifications Engine Fuel/Oil System The "Emission Compliance Period" referred to on the Emissions Carburetor: Compliance Label indicates the number All position diaphragm carburetor of operating hours for which the engine with integral fuel pump has been shown to meet Federal emission requirements. Air filter: Category A = 300 hours, B = 125 hours, Large area felt mat C = 50 hours The Emission Compliance Period used Fuel tank capacity: on the CARB-Air Index Label indicates 0.29 l (0.61 US pt) the terms: Extended = 300 hours, Fuel mix: Intermediate = 125 hours, See chapter "Fuel" Moderate = 50 hours Chain lubrication: STIHL single cylinder, two-stroke engine Fully automatic oil pump 009 Displacement: 36.6 cm3 009 L Oil tank capacity: 40.8 cm3 0.23 l (0.49 US pt) (2.23 cu.in) (2.49 cu.in) Bore: 36 mm 38 mm (1.42 in) (1.50 in) Weight Stroke: 36 mm 36 mm without bar and chain: (1.42 in) (1.42 in) 4.1 kg (9.0 lb) Power output according ISO 7293: 1.2 kW 1.5 kW Max. engine speed with bar and chain: 10,500 r.p.m. Ignition System Type: Electronic (breakerless) magneto ignition Spark plug (suppressed): Bosch WSR 6 F or NGK BPMR 7 A Heat range 200 Electrode gap 0.5 mm (0.02 in) Spark plug thread: M 14x1.25; 9.5 mm (0.37 in) long Cutting Attachment Recommended cutting attachments for compliance with § 5.11 of ANSI Standard B 175.1-2000 (see page 12 of this Manual): STIHL reduced kickback bar (with green label): Rollomatic with sprocket nose 30, 35 or 40 cm (12, 14 or 16 in) STIHL low kickback chain* (with green label): 9.32 mm (3/8") Picco-Micro1 (63 PM1) Chain sprocket: 6- or 7-tooth for 3/8" Picco pitch Other cutting attachments available for this powerhead are: STIHL yellow-labeled chain: Picco-Micro (63 RM) Since new bar/chain combinations may be developed after publication of this Manual, ask your STIHL dealer for the latest STIHL recommendations. In order to comply with the kickback performance requirements of § 5.11 of ANSI Standard B 175.1-2000, do not use replacement saw chain unless it has been designated as meeting the ANSI § 5.11 requirements on this specific powerhead, or has been designated as "low kickback" saw chain* in accordance with the ANSI B 175.12000 standard. * See definition of "low kickback chain" on page 11 of this Manual. 47