Stihl 009 Instruction Manual - Page 48
Maintenance Chart
![]() |
View all Stihl 009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Maintenance Chart Please note that the following maintenance intervals apply for normal operating conditions only. If your daily working time is longer than normal or cutting conditions are difficult (very dusty work area tropical wood etc.) shorten the specified intervals accordingly. before starting work after finishing work or daily after each refueling stop weekly monthly if faulty if damaged as required see page: Complete machine Throttle trigger , throttle trigger interlock, Master Control, depending on model Chain brake Filter in fuel tank Fuel tank Chain oil tank Chain lubrication Saw chain Guide bar Chain sprocket Air filter Cooling inlets Cylinder Carburetor Spark plug All accessible screws and nuts (not adjusting screws) Rubber vibration buffers Muffler Chain catcher 46 Visual inspection (condition, leaks) Clean Check operation Check operation Clean by STIHL dealer Check Clean, replace filterelement Replace pick-up body Clean Clean Check Inspect, also check sharpness Check chain tension Sharpen Check (wear, damage) Clean and turn over Deburr Replace Check Clean Replace Clean Clean, remove deposits Check idle adjustment - chain must not turn Readjust idle Replace Retighten Inspect Have replaced by STIHL dealer Inspect Inspect spark arrestor screen Clean or replace spark arrestor screen Check Replace x x x x x x x 30 x 30 x 29 x 29 xx x 28 x x 35 x x x x 36 x 42 x 35 x x x xx x 36 x x 38 x x x x x x 39 x x 40 x x x x xx x x
![](/manual_guide/products/stihl-009-instruction-manual-d920430/48.png)