Stihl 036 Instruction Manual - Page 34

Move Master Control lever

Page 34 highlights

STOP 0 5 3 4 143BA019 KN 143BA020 KN 143BA021 KN Alternative method of starting: • Hold the rear handle tightly between your legs, just above the knees. • Grip the front handle firmly with your left hand your thumb should be under the handle. • Pull the starter grip slowly with your right hand until you feel it engage then give the grip a brisk strong pull and push down the front handle at the same time do not pull out starter rope more than 70 cm (about 28 in) it might otherwise break. Do not let the starter grip snap back guide it slowly into the housing so that the starter rope can rewind properly. If engine is new, pull starter grip several times to prime the fuel line. When engine begins to fire: • Press the button of the decom• pression valve - Move Master Control lever to and continue cranking - blip the throttle trigger interlock and throttle trigger the Master Control lever will move to "Run" position and the engine settles down to idling speed. As the chain brake is still engaged, the engine must be returned to idling speed - or the clutch might otherwise be damaged.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

Alternative method of starting:
Hold the rear handle tightly
between your legs, just above the
knees.
Grip the front handle firmly with
your left hand -
your thumb should be under the
handle.
Pull the starter grip slowly with your
right hand until you feel it engage -
then give the grip a brisk strong pull
and push down the front handle
at the same time -
do not pull out starter rope more
than 70 cm (about 28 in) -
it might otherwise break.
Do not let the starter grip snap back -
guide it slowly into the housing
so that the starter rope can
rewind properly.
If engine is new,
pull starter grip several times
to prime the fuel line.
When engine begins to fire:
Press the button of the decom-
pression valve -
Move Master Control lever
±¶³
to
²Q
and continue cranking -
DV´VRRQ´DV´HQJLQH´UXQV¿
LPPHGLDWHO\
blip the throttle trigger
interlock
±·³
and throttle trigger -
the Master Control lever
±¶³´
will move
to "Run" position
±¸³
³
and the engine settles down
to idling speed.
As the chain brake is still engaged,
the engine must be returned to idling
speed
´LPPHGLDWHO\
-
or the clutch might otherwise
be damaged.
143BA019 KN
143BA020 KN
3
4
5
0
STOP
143BA021 KN
¶µ
º¶¹