Stihl 036 Instruction Manual - Page 44

7 6 5 5 4 001BA003 K 001BA004 K 001BA005 K • Use a screwdriver to pry the rope • out of the starter grip. Remove remaining rope from the rotor and starter grip. • Thread the new rope Part No. 1122 190 2900 through the top of the starter grip and then pull through the rope guide bush . Thread the rope through the rotor and secure it with a simple overhand knot. • Coat rope rotor bearing bore with • non-resinous oil. Slide rotor onto starter post turn it back and forth so that anchor ••• loop of rewind spring engages Refit the pawls in the rotor Fit the washer on the starter post Use screwdriver or suitable pliers to install spring clip on starter post and over the pawl pegs - the spring clip must point in clockwise direction - see illustration.