Stihl AR 1000 Instruction Manual - Page 18
After Finishing Work
View all Stihl AR 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
English WARNING To reduce the risk of unintended activation, never store the power tool with the connecting cord inserted into the AP Adapter socket, @ 16. Always remove the connecting cord before storing the power tool. To connect the battery to a power tool with a battery compartment: 3 3 2 1 ► Line up the arrow on the connecting cord plug (1) with the arrow on AP Adapter (3). ► Push the plug into the AP Adapter socket (2) with steady, even pressure until it is fully inserted. ► Push the AP Adapter into the power tool's battery compartment (4) until it engages with an audible click. The battery and the power tool are now connected. For further information on activating and operating the power tool, see the instruction manual of the power tool being operated with this battery. Since a new battery is not fully charged, STIHL recommends that you fully charge the battery before using it the first time, @ 8.2. 0000-GXX-2830-A0 13 After Finishing Work 12.3 Disconnecting the Backpack Battery WARNING To reduce the risk of severe personal injury and property damage from unintended activation, always unplug the battery before assembling, transporting, adjusting, cleaning, servicing, maintaining or storing the power tool and any other time it is not in use, @ 5.4. ► Switch off the power tool as described in its instruction manual. ► If a power tool with an integrated socket is used, pull the plug out of the power tool socket with steady, even pressure. ► If a power tool with battery compartment is used, remove AP adapter from power tool's battery compartment and then pull the plug out of the AP adapter socket with steady, even pressure. NOTICE Avoid exposing the battery to excessive heat or cold or prolonged periods of direct sunlight. Use or storage outside the recommended ambient temperature range can reduce the performance and/or service life of the backpack battery. For further information on activating and operating the power tool, see the instruction manual of the power tool being operated with this battery. 13 After Finishing Work 13.1 Preparing for Transportation or Storage To prepare the battery for transportation or storage: ► Switch off the power tool as described in its instruction manual. ► Disconnect the backpack battery, @ 12.3. ► If the battery became wet during operation, allow it to dry separately and completely before charging or storing. 16 0458-794-8621-C