Stihl FS 90 R Product Instruction Manual - Page 25
Loop handle without barrier bar, Securing the loop handle - line
View all Stihl FS 90 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
4 2 3 5 6 7 N Fit the clamp (3) in the loop handle (4) and place them both on the drive tube (5). N Place the clamp (6) in position. N Place the barrier bar (2) in position as shown. N Line up the holes. N Insert the screws (7) and tighten them down moderately against the barrier bar. N Go to "Securing the loop handle". 002BA099 KN 002BA136 KN 002BA147 KN Loop handle without barrier bar 8 8 7 74 3 5 6 1 1 N Fit the clamp (3) in the loop handle (4) and place them both on the drive tube (5). N Place the clamp (6) in position. N Line up the holes. N Fit washers (7) on the screws (8) and insert the screws in the holes. Fit the square nuts (1) and screw them down as far as stop. N Go to "Securing the loop handle". Securing the loop handle English A 9 4 10 N Secure the loop handle (4) about 20cm/8in (A) forward of the control handle (9). N Line up the loop handle. N Tighten down the screws firmly - lock the nuts if necessary. The sleeve (10) (not fitted on all models) must be between the loop handle and the control handle. FS 90, FS 90 R 23