Stihl FS 90 R Product Instruction Manual - Page 27

002BA103 KN 002BA382 KN 002BA104 KN Fitting the Skirt and Blade 4 4 1 5 Mounting the Limit Stop 7 6 Always fit the limit stop (6) when you use a circular saw blade. N Position the limit stop (6) on the gearbox flange. N Insert the screws (7) and tighten them down firmly. These parts must be fitted to the deflector (1) when you use a mowing head. N Slide the lower guide slot of the skirt (4) onto the deflector (1) - it must snap into position. N Push the blade (5) into the upper guide slot on the skirt and line it up with the first hole. N Insert the screw and tighten it down firmly. English Mounting the Cutting Attachment Preparations N Lay your brushcutter on its back so that the cutting attachment mounting face is facing up. Mounting hardware for cutting attachments The mounting hardware supplied depends on the cutting attachment that comes as original equipment with the new machine. Mounting hardware is not packed with machine Only mowing heads can be mounted. FS 90, FS 90 R 25