Stihl FS 90 R Product Instruction Manual - Page 26
Adjusting the Throttle, Cable, Fitting the Carrying Ring, Mounting the Deflector - adjustments
![]() |
View all Stihl FS 90 R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
English Adjusting the Throttle Cable Some machine versions are equipped with a throttle cable adjuster on the control handle. A properly adjusted throttle cable is the precondition for correct operation in the full throttle, starting throttle and idle positions. Adjust the throttle cable only after the unit is fully assembled - the control handle must be in the normal operating position. Fitting the Carrying Ring The carrying ring comes standard with the machine or is available as a special accessory. 1 1 2 Mounting the Deflector Mounting the Deflector 1 3 2 3 002BA142 KN 002BA163 KN N Use a suitable tool to push the slide to the end of the slot (see illustration). STOP 2 1 N Press down the throttle trigger lockout (1) and squeeze the throttle trigger (2) (full throttle) - this sets the throttle cable correctly. 249BA017 KN For position of carrying ring see "Main Parts". N Place the clamp (1) against the drive tube with the tapped hole on the left (viewed from engine). N Squeeze the two ends of the clamp together and hold in that position. N Insert the M6x14 screw (2). N Line up the carrying ring. N Tighten down the screw firmly. 1 Deflector for mowing attachments 2 Deflector for mowing heads Deflectors (1) and (2) are both mounted to the gearbox in the same way. N Place the deflector on the gearbox flange. N Insert the screws (3) and tighten them down firmly. 002BA380 KN 24 FS 90, FS 90 R
![](/manual_guide/products/stihl-fs-90-product-instruction-manual-59537d0/26.png)