Stihl SH 56 C-E Instruction Manual - Page 14

Starting / Stopping the, Engine

Page 14 highlights

296BA006 KN English Starting / Stopping the Engine Starting the engine N Observe safety precautions. Cranking 3 296BA007 KN The setting lever (2) allows the throttle trigger (3) to be locked in the full throttle position during operation. 1 Adjusting the choke knob If the engine is cold 296BA009 KN 295BA069 KN N Press the fuel pump bulb (1) at least five times - even if the bulb is filled with fuel. Adjusting the setting lever BG 86, SH 86 only N Set the choke knob to g If the engine is warm N To start, move the setting lever to the run position F N Set the choke knob to < Also use this setting if the engine has been running but is still cold. 295BA068 KN 295BA067 KN N Place the unit on the ground. N Make sure you have a firm footing: Hold the unit firmly with your right hand on the housing and press down. N Hold the starter grip with your left hand. Version with Easy2Start N Pull the starter grip steadily. Version without Easy2Start N Pull the starter grip slowly until you feel it engage and then give it a brisk strong pull. Do not pull out the starter rope all the way - it might otherwise break. 12 BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
English
12
Starting the engine
N
Observe safety precautions.
N
Press the fuel pump bulb
(1) at least
five times – even if the bulb is filled
with fuel.
Adjusting the setting lever
BG 86, SH 86 only
N
To start, move the setting lever to
the run position
F
The setting lever (2) allows the throttle
trigger (3) to be locked in the full throttle
position during operation.
Adjusting the choke knob
If the engine is cold
N
Set the choke knob to
g
If the engine is warm
N
Set the choke knob to
<
Also use this setting if the engine has
been running but is still cold.
Cranking
N
Place the unit on the ground.
N
Make sure you have a firm footing:
Hold the unit firmly with your right
hand on the housing and press
down.
N
Hold the starter grip with your left
hand.
Version with Easy2Start
N
Pull the starter grip steadily.
Version without Easy2Start
N
Pull the starter grip slowly until you
feel it engage and then give it a brisk
strong pull.
Starting / Stopping the
Engine
1
296BA009 KN
295BA069 KN
296BA007 KN
3
295BA067 KN
295BA068 KN
Do not pull out the starter rope all
the way – it might otherwise
break.
296BA006 KN