Stihl SH 56 C-E Instruction Manual - Page 15

BG 56, BG 66, SH 56

Page 15 highlights

N Do not let the starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind properly. As soon as the engine runs Stopping the Engine BG 56, BG 66, SH 56 English If the engine does not start N Make sure all settings are correct (choke knob, setting lever in run position F). N Repeat the starting procedure. If fuel tank has been run completely dry and then refueled 295BA072 KN 3 N Move the stop switch to 0 - the 1 engine stops - the stop switch springs back to the on position. 296BA009 KN BG 86, SH 86 N Press the fuel pump bulb (1) at least five times - even if the bulb is filled with fuel. N Now start the engine. 296BA008 KN 295BA073 KN N Blip the throttle trigger (3) - the choke knob moves to the run position F - the engine returns to idle speed. N Move the setting lever to 0 - the engine stops - the setting lever springs back to the on position. Other hints on starting If the engine stops while the choke knob in on g or during acceleration N Move the choke knob to < and continue cranking until the engine runs. BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56

BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
English
13
N
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
As soon as the engine runs
N
Blip the throttle trigger (3) – the
choke knob moves to the run
position
F
– the engine returns to
idle speed.
Stopping the Engine
BG 56, BG 66, SH 56
N
Move the stop switch to
0
– the
engine stops – the stop switch
springs back to the on position.
BG 86, SH 86
N
Move the setting lever to
0
– the
engine stops – the setting lever
springs back to the on position.
Other hints on starting
If the engine stops while the choke
knob in on
g
or during acceleration
N
Move the choke knob to
<
and
continue cranking until the engine
runs.
If the engine does not start
N
Make sure all settings are correct
(choke knob, setting lever in run
position
F
).
N
Repeat the starting procedure.
If fuel tank has been run completely
dry and then refueled
N
Press the fuel pump bulb
(1) at least
five times – even if the bulb is filled
with fuel.
N
Now start the engine.
3
296BA008 KN
295BA072 KN
295BA073 KN
1
296BA009 KN