Sub-Zero 427 Wine Storage Installation Instructions - Page 36
Model WS-30 Installation, Electrical Requirements
View all Sub-Zero 427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Model WS-30 Installation 36 Electrical Requirements For model WS-30, the electrical supply should be located within the shaded area shown in the illustration. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation. The outlet must be checked by a qualified electrician to be sure that it is wired with the correct polarity and is properly grounded. Do not use an extension cord or two-prong adapter. Electrical ground is required on this appliance. Do not remove the power cord ground prong. Electrical Requirements Power Supply Circuit Breaker Receptacle FRONT VIEW 7" (178) E 6" (152) 751/2" (1918) FROM FLOOR Location of electrical supply. 115 V AC, 60 Hz 15 amp 3-prong grounding-type