Sub-Zero 427R Sub-Zero Design Guide

Sub-Zero 427R Manual

Get Sub-Zero 427R PDF manuals and user guides View all Sub-Zero 427R manuals
Add to My Manuals
Save this manual to your list of manuals

Sub-Zero 427R manual content summary:

  • Sub-Zero 427R | Sub-Zero Design Guide - Page 1
    SUB-ZERO DESIGN GUIDE
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 2
    50 Wine Storage 64 Undercounter Refrigeration 84 Sub-Zero Warranties 92 IMPORTANT NOTE: Throughout this guide, dimensions may vary by ± 1/8" (3). Features and specifications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 3
    Built-In Refrigeration 3 subzero.com/specs Built-In Refrigeration. For the built-in line, Sub-Zero designers and engineers took 48SID BI-48SD • NEW! Internal dispenser models provide ice and chilled water inside the refrigerator. • Advanced water filtration and air purification systems. • Crisper
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 4
    panels slide into the door to blend into the kitchen design. Shown with full-length handle and louvered grille option for the traditional Sub-Zero look. Overlay. Custom cabinet overlay panels can be combined with unique hardware for design flexibility. Shown with pro handle option to complement
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 5
    Built-In Refrigeration 5 subzero.com/specs Flush Inset. This design option allows for a flush door and grille. Stainless steel panels are available as sales accessories. Shown with tubular handle option to
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 6
    (216) 515 (234) 529 (240) 538 (244) 582 (264) 608 (276) 608 (276) 630 (286) 656 (298) 656 (298) All Refrigerator / All Freezer Models OVERALL DIMENSIONS 36" (914) 24" (610) 84" (2134) 733/4" (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 237/8" (606) 237/8" (606) 371/4" (946) 17" (432) 23
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 7
    OVERALL DIMENSIONS 30" (762) 24" (610) 7 subzero.com/specs 36" (914) 24" (610) 84" (2134) 503/4" (1289) 84" (2134) 503/4" (1289) 23" (584) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 237/8" (606) 237/8" (606) 235/8" (600) 141/2" (368) 311/4" (796) 23/8" (60) MODELS BI-30U AND BI-30UG 23
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 8
    ) 4" (102) 237/8" (606) 81/2" (216) 101/4" (260) 237/8" (606) 221/4" (565) 83/4" (222) 237/8" (606) 121/2" (318) 261/4" (668) 23/8" (60) MODEL BI-36S Overall dimensions are based on stainless steel models. For flush inset applications, add 1/2" (13) to door clearance dimensions. 23/8" (60
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 9
    Built-In Refrigeration Side-by-Side Models OVERALL DIMENSIONS 48" (1219) 24" (610) 84" (2134) 733/4" (1873) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 237/8" (606) 93/4" (248) 14" (356) 237/8" (606) 30" (762) 23/8" (60) MODELS BI-48S, BI-48SID AND BI-48SD 9 subzero.com/specs
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 10
    Built-In Refrigeration 10 Built-In Models STANDARD INSTALLATION 24" (610) OPENING DEPTH TOP VIEW IMPORTANT NOTE: If an 83" (2108) grille height is specified, the opening height must be decreased by 7/8" (
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 11
    built-in models with an automatic ice maker feature a water filtration system. The water supply line water filtration system must be set to bypass mode. This is achieved by removing the water filter cartridge. Refer to the built-in installation guide packed with the unit for detailed instructions
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 12
    framed panel design option is available for all built-in overlay models. You must specify panels, full-length handles and a framed grille . Shown with full-length handle and louvered grille option for the traditional Sub-Zero look. Framed Panel Requirements MAX WEIGHT PER PANEL BI-36R, BI-36RG
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 13
    Built-In Refrigeration 13 subzero.com/specs Framed Panels If the thickness of the custom panels is less than 1/4" (6), they must be backed up with a sheet of shim material to build the
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 14
    Panel W 353/4" (908) BI-36RG Window Cut-Out Cut-Out Location W 251/2" (648) A 53/16" (132) H 699/16" (1767) H 541/16" (1373) B 105/16" (262) Models BI-30U and BI-30UG REFRIGERATOR Door Panel FREEZER Drawer Panel BI-30UG Window Cut-Out Cut-Out Location W H 293/4" (756) 4915/16" (1268) W 293
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 15
    Built-In Refrigeration 15 subzero.com/specs Framed Panels H H A B W W W W BI-36S / BI-42S / BI-42SID BI-42SD / BI-48SD BI-48S / BI-48SID Model BI-36S REFRIGERATOR Door Panel FREEZER Door Panel W 1913/16" (503) W 157/16" (392) H 699/16" (1767) H 699/16" (1767) Models BI-42S, BI-42SID
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 16
    panel height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions. Optional Grille Panel 30" (762) Models 36" (914) Models 42" (1067) Models 48" (1219) Models W 293/4" (756) 353/4" (908) 413/4" (1060) 473/4" (1213) H 815/16" (227) 815/16" (227) 815/16" (227) 815/16
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 17
    17 subzero.com/specs Framed Application PARTIAL FRAMED OPTION If you choose not to use custom panels above and below the glasswell for dispenser model BI- The partial framed accessory kit is available through your authorized Sub-Zero dealer. Refer to panel dimensions for the partial framed option
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 18
    for design flexibility. Shown with pro handle option to complement Wolf ranges and rangetops. Overlay Panels If you and your client have ordered an overlay model, you will be adding panels and handles to give the unit a more custom look. The overlay panel design option is available for all built-in
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 19
    subzero.com/specs Overlay Panels The illustrations provide a cross section view of the threepanel assembly, showing placement of the trim and a rear view of the three-panel assembly with critical dimensions, standard for all built-in models as this could cause damage to panels and the Sub-Zero unit.
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 20
    (227) W 191/2" (495) H 395/8" (1006) A 51/4" (133) Models BI-36U and BI-36UG REFRIGERATOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel For more information, refer to the built-in panel configurator at subzero.com/trade/panels. Grille panel dimensions listed are for a standard
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 21
    Built-In Refrigeration 21 subzero.com/specs Overlay Panels H H H H A B W W W W BI-36S / BI-42S / BI-42SID BI-42SD / BI-48SD BI-48S / BI-48SID Model BI-36S REFRIGERATOR Overlay Panel Spacer Panel Backer Panel FREEZER Overlay Panel Spacer Panel Backer Panel GRILLE Overlay Panel Spacer
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 22
    grille to allow for proper door swing and airflow. IMPORTANT NOTE: The flush inset application is not a separate model. This is an overlay unit in a flush installation. The same model is used in an overlay or flush inset application. Rough opening dimensions for the flush inset application assume
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 23
    Built-In Refrigeration 23 subzero.com/specs Built-In Models FLUSH INSET INSTALLATION 26 3/16" 24" (610) (665) DEPTH FLUSH TO CLEAT INSET DEPTH 1/4" (6) CLEAT 24" (610) DEPTH TO CLEAT 23/16" (56) 26 3/16" (
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 24
    panels and the Sub-Zero unit. Flush Inset Panel Requirements MAX WEIGHT PER PANEL BI-36R, BI-36RG and BI-36F All Other Flush Inset Models Grille Panel MIN be exposed when the doors are open. IMPORTANT NOTE: On glass door models, the edges of the overlay, spacer and backer panels of the window cut
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 25
    25 subzero.com/specs Flush Inset Panels PANEL OFFSETS Illustrations A-F provide panel offsets and reveals for all built-in models in a flush inset application. Refer to the chart below for reference to the illustrations relating to your specific model. For additional information on model-specific
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 26
    /16" (1253) 4915/16" (1268) H 19" (483) 181/16" (459) 1811/16" (475) H 91/4" (235) 85/16" (211) 815/16" (227) H 395/8" (1006) B 51/4" (133) Models BI-36U and BI-36UG REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset Panel
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 27
    Built-In Refrigeration 27 subzero.com/specs Flush Inset Panels H H H H A B W W W W BI-36S / BI-42S / BI-42SID BI-42SD / BI-48SD BI-48S / BI-48SID Model BI-36S REFRIGERATOR Flush Inset Panel Spacer Panel Backer Panel FREEZER Flush Inset Panel Spacer Panel Backer Panel GRILLE Flush Inset
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 28
    Built-In Refrigeration 28 Ice and Water Dispenser MODELS BI-42SD AND BI-48SD For models BI-42SD or BI-48SD, the to a maximum of 11/8" (29). IMPORTANT NOTE: Regardless of the thickness of the panel for model BI-42SD or BI-48SD, you must plan for a flat landing area for the decorative bezel
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 29
    subzero.com/specs Side Panels Side panels can be used with every design application. When planning for side panels with the installation of a built-in model steel and white enamel side panels are also available through your authorized Sub-Zero dealer. 24" (610) FRONT OF SIDE PANEL 1" (25) 17
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 30
    PANEL BI-36R, BI-36RG and BI-36F All Other Models Dual Wide Grille Panel MIN PANEL THICKNESS Framed Panels Overlay and . Some standard applications will require a dual installation kit, available through your authorized Sub-Zero dealer. If you are installing two units side by side in a flush inset
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 31
    INSTALLATION 24" (610) OPENING DEPTH TOP VIEW 31 subzero.com/specs 24" (610) OPENING DEPTH 83 3/4" (2127) OPENING HEIGHT A OPENING WIDTH SIDE VIEW Opening Widths Two 30" (762) Models 30" (762) and 36" (914) Models Two 36" (914) Models FRONT VIEW A 593/4" (1518) 653/4" (1670) 713/4" (1822
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 32
    Installing two built-in models side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also require a dual installation kit, available through your authorized Sub-Zero dealer. Dual installations
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 33
    Built-In Refrigeration 33 subzero.com/specs Dual Installation FLUSH INSET INSTALLATION 26 3/16" 24" (610 /4" (32) SIDE VIEW FRONT VIEW DETAIL B Opening Widths Two 30" (762) Models 30" (762) and 36" (914) Models Two 36" (914) Models A B 593/4" (1518) 621/4" (1581) 653/4" (1670) 681/4" (1734
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 34
    otherwise specified. For additional information on model-specific panel reveals, visit the specification library section of our website, subzerotrade.com. Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit. Panel Offsets ALL REFRIGERATOR / ALL
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 35
    Built-In Refrigeration 35 subzero.com/specs Dual Installation-Flush Inset Panels H H A H H B H A AH H A AH W BI-36R / BI-36F B W BI-36RG H W BI-30U / BI-36U B H W BI-30UG / BI-36UG BI-36R, BI-36RG
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 36
    Dual Installation Kit INSTALLATION WITH DUAL WIDE GRILLE This kit will replace the existing grilles that ship with the units and span and mounting hardware. Dual wide grilles are available for all built-in models and design applications. The overlay dual installation kit with grille will accept
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 37
    Built-In Refrigeration 37 subzero.com/specs Accessories These optional accessories are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. • Grilles for an 83" (2108) or 88" (2235) finished height. • Framed
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 38
    Built-In Refrigeration 38 Framed Panel Thickness FULL-SCALE TEMPLATE OPTIONAL EXTENDED FULL-LENGTH HANDLE STANDARD FULL-LENGTH HANDLE 1" 2" (25) (51) 1/4" (6) FRAMED PANEL 3" (76) 11/4" (32) PANEL 1" (25) PANEL 3/4" (19) PANEL 1/2" (13) PANEL DOOR PANEL THICKNESS FRAMED APPLICATION
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 39
    and flush inset panels must be a minimum of 5/8" (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door. 39 subzero.com/specs DEPTH OF TUBULAR AND PRO HANDLES 1" 2" 3" (25) (51) (76) 11/4" (32
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 40
    Built-In Refrigeration Overlay Application FULL-SCALE TEMPLATE 237/8" (606) TO REAR OF UNIT 0" (0) 1/4" (6) 1/2" (13) 3/4" (19) 1" (25) 11/4" (32) 11/2" (38) 13/4" (44) 2" (51) 21/4" (57) 21/2" (63) 23/4" (70) 3" (76) 31/4" (83) 31/2" (89) 1" (25) THICK PANEL 3/4" (19) THICK OVERLAY PANEL (TYPICAL)
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 41
    stop may be required to prevent interference with adjacent cabinets. 11/4" (32) 2 3/16" (56) ASSUMES 3/4" (19) FLUSH INSET PANEL THICKNESS 41 subzero.com/specs 1" (25) THICK PANEL 3/4" (19) THICK FLUSH INSET PANEL (TYPICAL) 1/4" (6) BACKER PANEL DOOR OPENING 110° TOP VIEW 0" 1" (25) SCALE
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 42
    Built-In Refrigeration 42 APPROX PROFILE OF STAINLESS STEEL WRAPPED DOOR AND HANDLE FILLER STRIP 11/4" (32) DOOR CLOSED Dual Installation-Standard FULL-SCALE TEMPLATE Typical framed, overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Depending on panel
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 43
    Built-In Refrigeration 43 subzero.com/specs PROFILE OF 3/4" (19) FLUSH INSET PANEL AND TUBULAR HANDLE FILLER STRIP 11/2" (38) 1/2" (13) DOOR CLOSED Dual Installation-Flush Inset FULL-SCALE TEMPLATE Typical flush
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 44
    MODEL 648PROG
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 45
    subzero.com/specs PRO 48 Refrigeration. Freshness finds unmistakable expression in the Sub-Zero PRO 48. An 800-pound monument to food preservation-equal parts conditions in refrigerator cabinet and drawer compartments. • Advanced water filtration system. • Slide-out stainless steel bins fit neatly
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 46
    48" (1219) 257/8" (657) 84" (2134) 421/8" (1070) HEIGHT DIMENSIONS ± 1/2" (13) 301/2" (775) 4" (102) 303/16" (767) 141/2" (368) MODELS 648PRO AND 648PROG 21" (533) 237/8" (606) 303/4" (781) 23/8" (60) SPECIFICATIONS Capacity / Weight INTERIOR CAPACITY 648PRO and 648PROG SHIPPING WEIGHT
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 47
    PRO 48 Refrigeration PRO 48 Models STANDARD AND FLUSH BUILT-IN INSTALLATIONS OPENING DEPTH TOP VIEW 47 subzero.com/specs OPENING DEPTH OPENING HEIGHT OPENING WIDTH SIDE VIEW Opening Dimensions Opening Width Opening Height Opening Depth FRONT VIEW Standard 471/2" (1206) 833/4" (2127) 24" (
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 48
    models come with an automatic ice maker and a water filtration system. The water Sub-Zero dealer. The water water filtration system must be set to bypass mode. This is achieved by removing the water filter cartridge. Refer to the PRO 48 installation guide packed with the unit for detailed instructions
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 49
    available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. • Stainless steel drawer dividers for compartmentalized storage. • Dozen egg container. • 90° door stop. • Replacement water filter. 49 subzero.com/specs
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 50
    MODELS IC-27F, 427G (WINE) AND IC-27R
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 51
    Integrated Refrigeration 51 subzero.com/specs Integrated Refrigeration. With custom front panels and hardware, Sub-Zero invented integrated columns, tall and drawer models that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration as practical
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 52
    356) 15/8" (41) 24" (610) 78 9/16" (1995) 81" (2057) TO TOP OF OPENNG 1/2" (13) ± ADJUSTMENT IN LEVELING LEGS 93/4" (248) 4" (102) 27" (686) TALL MODELS 27" (686) 14" (356) 13/16" (21) 24" (610) 78 9/16" (1995) 80" (2032) TO TOP OF 3/8" OPENNG (10) 1/2" (13) 131/4" (337) 20 3/8" (518
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 53
    Integrated Refrigeration Overall Dimensions 36" (914) TALL MODELS 36" (914) 14" (356) 15/16" (33) 24" (610) 7713/16" (1976) 80" ( 3/4" (248) 4" (102) 24" (610) 191/2" (495) 7" (178) 341/2" (876) DIMENSIONS WILL VARY WITH PANEL THICKNESS MODELS 736TR, 736TFI AND 736TCI 53 subzero.com/specs
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 54
    700BR, 700BF(I) AND 700BC(I) Capacity and Weight Interior Capacity COLUMN MODELS IC-27R IC-27FI 27" (686) TALL MODELS 700TR 700TFI 700TCI 36" (914) TALL MODELS 736TR 736TFI 736TCI 27" (686) DRAWER MODELS 700BR 700BF(I) 700BC(I) R cu ft (L) F cu ft (L) 16.2 (459) 16.3 (462) 15.5 (439) 10.2 (289
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 55
    25" (635) OPENING DEPTH TOP VIEW 55 subzero.com/specs IMPORTANT NOTE: The depth of each integrated model is 24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 56
    Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance, is required. A ground fault circuit interrupter (GFCI) is FLOOR (6) FRONT VIEW 21/2" (64) 171/2" (445) 1/4" FLOOR (6) FRONT VIEW 41/2" (114) 27" (686) models. 36" (914
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 57
    subzero.com/specs Plumbing Requirements For integrated models with an automatic ice maker, the water supply line should be located through the floor or back wall, within the shaded area shown in the illustrations. The water Sub-Zero dealer. IMPORTANT NOTE: It is critical that the water water filter
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 58
    (6) is possible with adjustments to panel dimensions. 1/8" (3) 13 9/16" (345) 1/8" (3) 1611/16" (424) 4" (102) 36" (914) FINISHED OPENING 36" (914) TALL MODELS 1/8" (3) 13 9/16" (345) 1/8" (3) 1611/16" (424) 26 3/4" (679) PANEL WIDTH 341/2" (876) 4" (102) 27" (686) FINISHED OPENING DRAWER
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 59
    Integrated Refrigeration 59 subzero.com/specs Cabinetry Applications DOOR PANEL HEIGHT The height of MOLDING DECORATIVE VALANCE HINGE REMOVABLE MOLDING INTEGRATED UNIT (SIDE VIEW) UPPER VALANCE COLUMN AND TALL MODELS INTEGRATED UNIT (SIDE VIEW) HEIGHT OF PANEL 4" (102) TO 9" (229) FROM FLOOR
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 60
    ) thick panel is required, but the thickness can be increased provided the panel weight limit is not exceeded. IMPORTANT NOTE: The depth of each integrated model is 24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 61
    subzero.com/specs placed side by side in a dual installation. Depending on the models specified, opening widths will be 54" (1372), 63" ( space between the units. Dual installation kits are available through your authorized Sub-Zero dealer. IMPORTANT NOTE: If a 27" (686) unit is installed next
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 62
    your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. used on integrated models. Standard Handles DOOR Tubular Handle Pro Handle 27" (686) MODEL DRAWERS Tubular Handle Pro Handle 36" (914) MODEL DRAWERS Tubular Handle Pro
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 63
    19), use the built-in 90° door stop to prevent damage to the panel and face frame at the maximum door opening. 63 subzero.com/specs INTEGRATED DOOR MAXIMUM 105° OPENING 105° OPENING TOP VIEW-1/4 SCALE LINE OF INTERFERENCE LINE OF INTERFERENCE MAXIMUM 105° OPENING 1/8" (3) MINIMUM REVEAL 3/4" (19
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 64
    MODEL WS-30
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 65
    Wine Storage 65 subzero.com/specs Wine Storage. Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced shelves, soft lighting, custom cabinetry if desired-Sub-Zero helps make a wine collection an
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 66
    Wine Storage Overall Dimensions UNDERCOUNTER WINE STORAGE 151/8" (384) 24" (610) 341/16" (865) 4" (102) 165/8" (422) 13/4" (44) MODEL 315W 66 237/8" (606) 24" (610) 34" (864) 4" (102) 253/8" (645) MODEL 424G 13/4" (44) Overall dimensions are based on stainless steel panels and handles.
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 67
    Wine Storage 67 subzero.com/specs Overall Dimensions FULL-SIZE WINE STORAGE 27" (686) 14" (356) 13/16 248) 4" (102) 24" (610) 45/8" (117) 251/2" (648) DIMENSIONS WILL VARY WITH PANEL THICKNESS MODEL 427G Overall dimensions do not include panels or handles. 24" (610) 191/2" (495) 45/8" (117)
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 68
    195 (88) 220 (100) 395 (179) 410 (186) 445 (202) HEIGHT DIMENSIONS ± 1/2" (13) 4" (102) 237/8" (606) 237/8" (606) 311/4" (796) 17" (432) MODEL WS-30 23/8" (60) Overall dimensions are based on the stainless steel model. For flush inset applications, add 1/2" (13) to door clearance dimensions.
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 69
    UNDERCOUNTER WINE STORAGE 24" (610) OPENING DEPTH TOP VIEW 69 subzero.com/specs FULL-SIZE WINE STORAGE 25" (635) OPENING DEPTH TOP VIEW 24" (610) OPENING DEPTH 341/2" (876) OPENING HEIGHT A OPENING WIDTH SIDE VIEW MODELS 315W AND 424G Opening Width 315W 424G FRONT VIEW A 151/4" (387
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 70
    by side, refer to pages 30-31 for dual standard installations. 24" (610) OPENING DEPTH 83 3/4" (2127) OPENING HEIGHT 291/2" (746) OPENING WIDTH SIDE VIEW MODEL WS-30 FRONT VIEW
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 71
    Wine Storage 71 subzero.com/specs Planning Information ELECTRICAL REQUIREMENTS The electrical supply should be located within the shaded area shown in the illustration for your specific model. For model 315W, the electrical supply can be located anywhere on the back wall of the opening. Follow the
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 72
    the door panel and adjoining cabinetry at the maximum 145° door swing. Refer to the full-scale template at the end of this section. FREESTANDING MODEL 424FSG Model 424FSG does not require any panels or surrounding cabinetry. It has a beautiful stainless steel exterior that is designed to be used in
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 73
    lock kit on models 427G or 427RG, you may have to order door panels that exceed the 80" (2032) finished height. Consult the lock kit installation instructions and see if your panels will allow for an adequate installation. These instructions are available on our website, subzero.com. Integrated
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 74
    panel. The window cut-out edges of the framed panel will need to be finished, as they will be exposed. Framed Panel Requirements MODEL WS-30 Max Panel Weight Min Panel Thickness 75 lbs (34 kg) 1/4" (6) TRIM REVEAL 1/4" (6) min MAIN FRAME FRAMED PANEL SPECIFICATIONS A A A H A W WS-30 Framed
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 75
    subzero.com/specs Model WS-30 OVERLAY PANEL Overlay model WS-30 can be used in an overlay or flush inset application. The specific application will affect panel sizes, opening dimensions and the installation. Overlay model panel dimensions, as this could cause damage to panels and the Sub-Zero unit.
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 76
    stop may be required to prevent interference with adjacent cabinets. Flush Inset Panel Requirements MODEL WS-30 Max Panel Weight Min Panel Thickness 75 lbs (34 kg) 5/8" panel dimensions, as this could cause damage to panels and the Sub-Zero unit. 9/16" (14) 5/16" (8) min Panel assembly cross section
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 77
    . Contact your authorized Sub-Zero dealer for the proper components and installation instructions. For questions relative to the installation, call Sub-Zero at 800-222-7820. For local dealer information, visit the find a showroom section of our website, subzero.com. DUAL STANDARD INSTALLATIONS
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 78
    two models WS-30 or a model WS-30 and built-in unit side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also require a dual installation kit, available through your authorized Sub-Zero dealer
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 79
    Wine Storage 79 subzero.com/specs Model WS-30 DUAL FLUSH INSET PANELS When installing two models WS-30 or a model WS-30 panel dimensions. Exceeding dimensions could cause damage to the panels and the Sub-Zero unit. Panel Offsets MODEL WS-30 Doors (hinge) / Grille Sides Doors (handle) Sides Grille
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 80
    use of side panels may change the width of your rough opening. When installing a model WS-30 with a custom side panel, an accessory kit is required. Stainless steel side panels are also available through your authorized Sub-Zero dealer. The side panel will need to be a minimum of 24" (610) deep and
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 81
    subzero.com/specs Accessories These optional accessories are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero of the door frame profile for wine storage models and the relationship to the overlay panel (rails
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 82
    For each model, the wine storage shelves have a natural cherrywood facing. You can replace these strips (624) Dimensions will vary for model 315W. Refer to specifications on our website, subzero.com. A (WIDTH) FRONT VIEW WINE SHELF WOOD FACING WINE STORAGE MODELS 5/8" Maximum Thickness (16) 7/
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 83
    installed flush with adjacent cabinetry, however, there is potential for interference with the panel if the door is opened past 90°. MODEL 424 83 subzero.com/specs DOOR CLOSED 3/4" (19) DOOR PANEL DOOR OPENING 145° TOP VIEW 0" 1" (25) SCALE 1/2" (13) 1/4" (6) 1/8" (3) MAXIMUM DOOR OPENING 145
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 84
    MODELS 424G (WINE) AND UC-24BG
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 85
    Undercounter Refrigeration 85 subzero.com/specs Undercounter Refrigeration. Sub-Zero undercounter refrigeration is a helpful addition to a master suite, bar, home office or media room. In the kitchen, a high-volume ice machine is a must for entertaining. The design flexibility of these compact yet
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 86
    (44) MODELS UC-24R, UC-24BG, UC-24C(I) AND UC-24RO Specifications Capacity / Weight INTERIOR CAPACITY UC-24R, UC-24BG and UC-24RO UC-24C(I) R CU FT (L) 5.7 (161) 3.6 (102) ICE STORAGE CAPACITY UC-15I(P) and UC-15I(P)O SHIPPING WEIGHT UC-24R, UC-24BG, UC-24C(I) and UC-24RO UC-15I(P) and UC-15I
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 87
    codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance, is required. IMPORTANT NOTE: Models UC-24RO and UC-15I(P)O are designed and safe for use in outdoor applications. When installed outdoors, a ground fault circuit interrupter (GFCI) is required to
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 88
    model UC-24C(I) and ice machine models, the water supply line should be located within the shaded area shown in the illustrations below. The water through your authorized Sub-Zero dealer. IMPORTANT NOTE: A reverse osmosis system can be used provided there is constant water pressure of 20 psi
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 89
    Undercounter Refrigeration 89 subzero.com/specs Overlay Panel MODELS UC-24R, UC-24C(I) AND UC-15I(P) The overlay design allows for a decorative panel to cover the door trim for a seamless appearance that will complement surrounding cabinetry. You may also choose to
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 90
    Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero. Door Frame Profile FULL-SCALE TEMPLATE The full-scale template shows the door frame profile for model UC-24BG and the relationship to the overlay panel (rails and stiles). Glass CL 1" (25)
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 91
    . 91 subzero.com/specs 191/2" (495) FRONT VIEW WINE SHELF WOOD FACING MODELS UC-24BG AND UC-24C(I) 5/8" Maximum Thickness (16) 7/64" (3) 11/2" (38) 27/32" (21) 5/64" (2) 23/64" (9) 9/16" (14) SIDE VIEW The information and images in this guide are the copyright property of Sub-Zero, Inc
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 92
    rights that vary from state to state. To receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact Sub-Zero, Inc., P. O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com or call 800-222-7820. *Stainless steel
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 93
    rights that vary from state to state. To receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact Sub-Zero, Inc., P. O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com or call 800-222-7820. *Stainless steel
  • Sub-Zero 427R | Sub-Zero Design Guide - Page 94
    SUB-ZERO, INC. P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820 SZDG 9/2011
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
SUB-ZERO DESIGN GUIDE