Sub-Zero 427R Sub-Zero Design Guide - Page 19
subzero.com/specs
View all Sub-Zero 427R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Built-In Refrigeration 19 subzero.com/specs Overlay Panels The illustrations provide a cross section view of the threepanel assembly, showing placement of the trim and a rear view of the three-panel assembly with critical dimensions, standard for all built-in models. Overlay grille panels for the panel grille match the design of the overlay door panels. Dimensions for the grille panel are listed in the overlay panel specifications on the following pages. IMPORTANT NOTE: On glass door models, the edges of the overlay, spacer and backer panels of the window cut-out will need to be finished, as they will be exposed. IMPORTANT NOTE: When installing two units in a side-byside application, refer to pages 30-31 for dual standard installations. Be aware that rough opening dimensions are different for this application. SPACER PANEL OVERLAY PANEL BACKER PANEL TRIM OVERLAY PANEL SPACER PANEL BACKER PANEL 5/16" (8) min 1/8" (3) 3/4" (19) typical .10" (3) 1/4" (6) Panel assembly cross section. Panel assembly rear view. Do not exceed overlay panel dimensions, as this could cause damage to panels and the Sub-Zero unit.