Sub-Zero 427R Wine Storage Use & Care - Page 11
Wine Storage Use & Care, Wine Storage
View all Sub-Zero 427R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Wine Storage Use & Care 11 subzero.com Wine Storage WINE STORAGE SHELVES All Sub-Zero wine storage models have roller-assembly shelves with a full three-quarter extension for easy access to all stored bottles. Models 424G and 424FSG have roller-assembly shelves in all instances with the exception of the bottom stationary shelf. The wine storage shelves have a solid natural cherrywood facing that can be replaced with other wood to match your cabinetry. Details on how to replace the shelves' wood facing can be found in the Sub-Zero design guide. Check our website at subzero.com or call Sub-Zero customer care at 800-222-7820. IMPORTANT NOTE: If you choose to stain or seal the shelves' natural cherrywood facing, be aware that some of these substances are hazardous and will damage stored wine. Your wine storage unit is intended to maximize the storage of bottles in an ideal environment where the wine stays in contact with the cork at an even temperature. Standard 750 ml bottles fit on all shelves of any wine storage unit. Half-bottles and magnums can be arranged on the shelves in the same manner as 750 ml bottles. Refer to the illustration for the proper arrangement of bottles on the shelves. WINE STORAGE SHELF REMOVAL To remove a wine storage shelf, pull the shelf out to its full extension, gently and evenly lift up on both sides of the front of the shelf and remove. Refer to the illustration below. Reverse the procedure to reinstall the shelf. Be sure to unload all bottles from the wine storage shelf before removing it. Wine storage arrangement. Wine storage shelf removal. When storing magnums, you must remove the shelf above to accommodate these larger bottles. Failure to do so may cause the bottles to break.