Sub-Zero 427R Wine Storage Use & Care - Page 13

Wine Storage Use & Care 13 subzero.com Bulk Storage Drawers-Model 427RG DRAWER REMOVAL IMPORTANT NOTE: For model 427RG, you must disconnect the control cable before removing the top drawer. Refer to the illustration below. IMPORTANT NOTE: Be sure to unload the contents before removing the drawer. To remove a drawer from model 427RG, pull the drawer open until it stops. Lift up evenly on both sides of the drawer front and pull out, as shown in the illustration below. To replace a drawer, raise the front of the drawer up and place onto the drawer slide tracks. Be sure to engage the front holes of the drawer slide with the small pegs at the end of each rail. Reconnect the control cable. DRAWER DIVIDER Each drawer of the model 427RG has a divider that can be easily removed. To remove, pull the drawer divider forward and pivot the back edge of the divider away from the back of the drawer. Reverse the procedure to reinstall the divider. Refer to the illustration below. Before removing the top drawer of the model 427RG, you must disconnect the control cable. Drawer divider. Control cable. Drawer removal.