Sub-Zero IC-30FI Integrated Installation Guide - Page 14

INSTALLATION Completion DOOR TRIM INSTALLATION After panels have been adjusted, install the decorative side trim to the door/drawers. To install, align the trim with the bracket on the side of the door/drawer and snap into place, pushing the trim toward the back of the panel. Refer to the illustration below. SIDE TRIM INSTALLATION Install the decorative trim strip to the handle side of tall and column models. The side trim snaps over the bracket attached to the handle side of the unit. Refer to the illustration below. TOP TRIM INSTALLATION Identify the top trim strips by the notch on one end at the bottom; this trim strip fits on the hinge side of the unit. Insert the outer end of each trim strip behind the vertical side trim. Engage the snap in the plastic side bracket and slide the panel as far to the outside as possible. Refer to the illustration below. Rotate the inner end of each panel into the side flange of the center shroud, next to the water filter access door. Press on the trim strip to snap into place. Refer to the illustration below. DOOR TRIM Door trim. Side trim. Inner top trim. Outer top trim. 14 | Sub-Zero Customer Care 800.222.7820