Symphonic CWF719 Owner's Manual - Page 15

- 15 -

EN

1C29

SET UP FOR USE

You can program the tuner to scan all the channels you receive in your area.

NOTE:

Channel memory programming is NOT needed when connected to a cable box or satellite box. Just

select the TV/DVD/VCR channel selector to the output channel of the cable box or satellite box (Ex CH3).

Then select the channel to be viewed on the Cable Box or Satellite Box.

CHANNEL SET UP FOR THE

FIRST TIME

1

Plug in the TV/DVD/VCR power cord

Plug the TV/DVD/VCR power cord into a

standard AC outlet.

NOTE:

•

If some digits appear in the corner of

the screen, press the POWER button

without unplugging the power cord.

2

Turn on the TV/DVD/VCR

Press the POWER button to turn on the TV/DVD/VCR.

3

Select “ENGLISH” or “ESPAÑOL” or “FRANÇAIS”

Select “ENGLISH” or

“ESPAÑOL”=Spanish or

“FRANÇAIS” =French using the

ENTER button. “[ ]” indicate the

selected language.

4

Begin auto preset

Press the Arrow button

K

or

L

to

point to “AUTO PRESET”.

Then press the ENTER button.

The tuner scans and memorizes all

active channels in your area.

NOTES:

•

The TV/DVD/VCR distinguishes between standard

TV channels and cable channels.

•

If you want to play or record a video tape

BEFORE

presetting the tuner, you must press the

SETUP button on the remote control. To preset the

tuner again, see “CHANNEL SET UP AGAIN” on

page 16.

•

The TV/DVD/VCR may memorize TV channels as

CATV channels if reception conditions is poor. If

this happens, try AUTO MEMO action again when

reception conditions are better.

5

After scanning

The tuner stops on the lowest memorized channel.

If you want to recall the selected channels, you can

select the desired channel directly with the remote con-

trol number buttons or the CHANNEL button

K

or

L

.

TV/VCR

DELETING (OR ADDING)

CHANNEL

The channels you no longer receive or seldom watch

can be deleted from the memory. (Of course, you can

add the deleted channel into the memory again.)

1

Select “CHANNEL SET UP”

Press the SETUP button on the

remote control.


K

or

L

to

point to “CHANNEL SET UP”.

Then, press the ENTER button.

2

Select “ADD/DELETE CH”


K

or

L

to

point to “ADD/DELETE CH”.

Press the ENTER button.

3

Enter the desired channel number


K

or

L

until

your desired channel number appears.

(You can also use the number buttons

or the CHANNEL buttons

K

/

L

to

enter it) (Example: CH8)

4

Delete (or add) it from (into) memory

Press the ENTER button. The channel number changes

to light red. The channel is deleted from memory.

•

To delete another channel, repeat steps [3] and [4].

•

If you press the ENTER button again, the channel

is memorized again.

•

Press the RETURN button to return to TV/VCR

SETUP MENU.

5

Exit the channel setup mode

Press the SETUP button on the remote control to

returns to TV mode.

NOTE:

To confirm that channel(s) has been deleted

or added, press the CHANNEL button

K

or

L

.

TV/VCR

Added channel: Light blue.

Deleted channel: Light red.

– SET UP –

B

LANGUAGE

[ENGLISH]

ESP

FRA

AUTO PRESET

– SET UP –

LANGUAGE

[ENGLISH]

ESP

FRA

B

AUTO PRESET

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

B

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE

[ENGLISH]

CAPTION

[OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

– CHANNEL SET UP –

B

ADD / DELETE CH (TV)

AUTO PRESET

08

ADD / DELETE

TV/VCR SECTION

Symphonic CWF719 Owner's Manual - Page 15

SET UP FOR USE

Page 15 highlights