Symphonic CWF719 Owner's Manual - Page 17

CLOCK SET UP (AUTO / MANUAL) TV/VCR The TV/DVD/VCR clock must be set correctly before VCR timer recording is possible. It is suggested that the clock be set manually when first setting up the TV/DVD/VCR. Then, setup auto clock correction which will periodically correct the setting if necessary. NOTE: If you cannot receive a station with time signals, auto clock setting cannot be performed. Use manual setting only. MANUAL CLOCK SETTING Make sure ... • TV/DVD/VCR power is turned on. In the example below, the clock is to be set to: DATE May 6th, 2003 SETTING TIME 5:40PM 1 Select "SETTING CLOCK" Press the SETUP button on the remote control. Press the Arrow button K or L to point to "SETTING CLOCK". Then, press the ENTER button. - TV/VCR SETUP - TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 2 Select "MANUAL CLOCK - SETTING CLOCK - SET" AUTO CLOCK [ON] AUTO CLOCK CH SEARCH Press the Arrow button K or L to AUTO CLOCK CH [02] B MANUAL CLOCK SET D.S.T. [OFF] point to "MANUAL CLOCK SET". Then, press the ENTER button. 3 Select the month Press the Arrow button K or L until your desired month appears. (Example: May → 05) Then, press the Arrow button B. - MANUAL CLOCK SET - MONTH DAY YEAR 05 HOUR MINUTE -- : -- -- 4 Select the day Press the Arrow button K or L until your desired day appears. (Example: 6th → 06) Then, press the Arrow button B. - MANUAL CLOCK SET - MONTH DAY YEAR 05 / 06 --- ---- HOUR MINUTE -- : -- -- 6 Select the hour Press the Arrow button K or L until your desired hour appears. (Example: 5, PM) Then, press the Arrow button B. - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 6 TUE 2 0 0 3 HOUR MINUTE 0 5 : - - PM 7 Select the minute Press the Arrow button K or L until the desired minute appears. (Example: 40) - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 6 TUE 2 0 0 3 HOUR MINUTE 0 5 : 4 0 PM 8 Start the clock 5:40 PM Press the SETUP button on the remote control. Although seconds are not displayed, they begin counting from 00 when you press the SETUP button on the remote control. Use this feature to synchronize the clock with the correct time. NOTE: When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock. TO CHANGE CLOCK SETTING If you want to change the clock, 1)Follow steps [1] and [2]. 2)Select where you want to change using the Arrow button B or s. 3)Enter correct numbers using the Arrow button K or L. 4)Press the SETUP button on the remote control to start the clock. PLEASE NOTE: If there is no local PBS station in your area or on your cable system, select "AUTO CLOCK" and press the ENTER button to turn [OFF] this function. Then you can manually adjust the clock. 5 Select the year Press the Arrow button K or L until your desired year appears. (Example: 2003) Then, press the Arrow button B. - MANUAL CLOCK SET - MONTH DAY YEAR 0 5 / 0 6 TUE 2 0 0 3 HOUR MINUTE -- : -- -- - 17 - EN 1C29