Symphonic CWF719 Owner's Manual - Page 18
Automatic Clock Setting
![]() |
View all Symphonic CWF719 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
AUTOMATIC CLOCK SETTING Make sure ... • The TV/DVD/VCR is turned on. • Confirm the TV/DVD/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT IN jack on the rear of the TV/DVD/VCR. NOTE: • If a cable converter box is being used, make sure it is powered on. • You must use the TV/DVD/VCR remote control to perform the clock setting procedure. Press the Arrow button K or L to select "SETTING CLOCK". Press the ENTER button to enter "SETTING CLOCK" menu. Press the Arrow button L to select "AUTO CLOCK CH". Press the ENTER button, then press the Arrow button B or s until you locate Auto Clock Set station number. See item 3 above. Press the SETUP button to exit the screen. - TV/VCR SETUP - TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH - SETTING CLOCK - AUTO CLOCK [ON] AUTO CLOCK CH SEARCH B AUTO CLOCK CH [ 45] MANUAL CLOCK SET D.S.T. [OFF] 1 Select "SETTING CLOCK" Press the SETUP button on the remote control. Press the Arrow button K or L to select "SETTING CLOCK". Press the ENTER button to enter "SETTING CLOCK" menu. - TV/VCR SETUP - TIMER PROGRAMMING B SETTING CLOCK CHANNEL SET UP USER'S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN TIME SEARCH INDEX SEARCH 5 Turn off the TV/DVD/VCR Once the TV/DVD/VCR is turned off , it will periodically check and set the correct date and time. 2 Set "AUTO CLOCK" to [ON] Press the ENTER button until AUTO CLOCK [ON] appears. - SETTING CLOCK - B AUTO CLOCK [ON] AUTO CLOCK CH SEARCH AUTO CLOCK CH [02] MANUAL CLOCK SET D.S.T. [OFF] 3 Begin "AUTO CLOCK CH SEARCH" Press the Arrow button L to select "AUTO CLOCK CH SEARCH". Press the ENTER button. • The TV/DVD/VCR is now searching for the station which contain the auto clock set signal. - SETTING CLOCK - AUTO CLOCK [ON] B AUTO CLOCK CH SEARCH AUTO CLOCK CH [02] MANUAL CLOCK SET D.S.T. [OFF] The search for a signal may take up to 20 seconds per channel. •"_ _" appears at the lower left of the screen when the search has - AUTO CLOCK CH SEARCH - ended. 08 10 13 • Auto Clock station- write down the number(s) that appear on the screen. These are the auto clock __ station(s) in your area. See item 4 below. • If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 17. Press the SETUP button to exit the screen. NOTE: During Auto Clock CH Search, the picture may be distorted. This is normal. 4 Enter the channel number that contains the Automatic Clock Setting Signal Press the SETUP button on the remote control. - 18 - EN 1C29
![](/manual_guide/products/symphonic-cwf719-owners-manual-9c516ad/18.png)