Symphonic CWF719 Owner's Manual - Page 47
Troubleshooting Guide
View all Symphonic CWF719 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
TROUBLESHOOTING GUIDE If the TV/DVD/VCR does not perform properly when operated as instructed in this Owner's Manual, check the player, consulting the following checklist. PROBLEM No power. The TV/DVD/VCR does not respond to the remote control. CORRECTIVE ACTION • Make sure the power plug is connected to an AC outlet. • Make sure the power is turned on. • Check if the power plug is connected to an AC outlet. • Check the batteries in the remote control. • Aim the remote control directly at the remote sensor. If necessary, remove all the obstacles between the sensor and the remote. • You have to be within 23 feet of the TV/DVD/VCR. • Check if the correct mode is selected. If not switch the mode by pressing the SELECT button on the remote control,whichever you need. TV/VCR Mode Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. Before arranging for service, check these items. It could save your time and money. PROBLEM No picture and sound. No picture or poor picture on TV/DVD/VCR. No sound or poor sound. Bars On Screen Picture Distorted or Blurred Picture Rolls Vertically Lines or Streaks in Picture No Color Poor Reception on Some Channels Ghosts in Picture Weak Picture Sound OK, Picture Poor CORRECTIVE ACTION • Make sure the AC cord is connected to an AC outlet. • Check antenna connection. • Press the SELECT button on the remote control to select TV mode. Then try other TV feature. • Let the TV/DVD/VCR program its tuner memory. • Adjust direction or replace antenna. • Adjust picture controls. • Adjust volume control on remote control or main unit. • Press the MUTE button to restore sound. • If outside antenna is being used, check for broken wire. • Check for local interference. • Try a new channel, if OK, then possible station trouble. • If outside antenna is being used, check for broken wire. • Try a new channel, if OK, then possible station trouble. • If outside antenna is being used, check for broken wire. • Check for local interference. • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Adjust COLOR control. • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Check for local interference. • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Adjust CONTRAST & BRIGHT control. • Try a new channel, if OK, then possible station trouble. • Is antenna connected to terminal on the back of the set? • If outside antenna is being used, check for broken wire. • Check for local interference. • Adjust CONTRAST & BRIGHT control. - 47 - EN 01A11