Symphonic CWF719 Owner's Manual - Page 19

TV OPERATION WATCHING A TV PROGRAM TV/VCR 1 Turn on the TV/DVD/VCR Press the POWER button to turn on the TV/DVD/VCR. 2 Select the channel number Press the CHANNEL button K or L to select your desired channel number or press the number on the remote control. Note for using the Number button on the remote control: ¡When selecting cable channels which are higher than 99, press +100 first, then, press the last two digits. (Example: to select channel 125, first press "+100" then press "2" and "5"). ¡You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on). Remember: If the TV/DVD/VCR is connected to a cable box or satellite box, the TV/DVD/VCR must be on CH3 or CH4, then the channel to be viewed must be selected on the cable box or satellite box. 3 Adjust sound Press the VOLUME button X or Y to adjust the volume. VOLUME 20 C C C C C CCCCCCC NOTES: • If you press the CHANNEL button o or pin the DVD mode, you can change the TV channels. Even if you turn off the TV/DVD/VCR in the DVD mode, when you turn it on again, it will go into the TV/VCR mode. DEGAUSSING TV/VCR Magnetism from nearby appliances and speakers might affect the color of the TV picture. If this happens, move this TV/DVD/VCR away from the appliance. If the color is still not correct, unplug the power cord, then plug it in again 30 minutes or so later. PICTURE CONTROL TV/VCR The TV/DVD/VCR's picture controls - BRIGHT, CONTRAST, COLOR, TINT and SHARPNESS - are preset to factory specifications. Although they are usually the best, you may need to make some further adjustments for a natural looking image. NOTES: • Procedures must be followed within 5 seconds or the Picture Control mode will be cancelled. • When setting the Picture Control, the Game mode will be cancelled. Make sure ... • TV/DVD/VCR power must be turned on. 1 Select "PICTURE CONTROL" Press the PICTURE button on the remote control. 2 Select item you want to adjust Press the Arrow button K or L until desired control is displayed. BRIGHT CONTRAST COLOR TINT SHARPNESS BRIGHT - PPPPPPPCPPPPPPP+ 3 Adjust the picture control Press the Arrow button B or s to adjust to your desired level. BRIGHT CONTRAST COLOR Arrow button s Arrow button B to decrease to increase brightness brightness to decrease to increase contrast contrast to pale to brilliant TINT to purple to green SHARPNESS to soft to clear • If there is a power failure of any kind, the TV/DVD/VCR will retain its memory for this fea- ture. - 19 - EN 1C29