Symphonic CWF719 Owner's Manual - Page 26

PLAYBACK NORMAL PLAYBACK TV/VCR Make sure ... • TV/DVD/VCR power must be turned on. 1 Insert a prerecorded tape If the erase-protection tab has been removed, the TV/DVD/VCR will start playback automatically. 2 To begin playback PLAY B Press the PLAY button. 3 To stop playback STOP Press the STOP button when play- back is completed. NOTES: • If you press the PLAY button (of the TV/VCR side) in the DVD mode, you can start the VCR playback. • If you press the SELECT button in the VCR play- back, it will stop and the mode will change to the DVD mode. In addition, the same function operates with the DVD side PLAY button or the OPEN/CLOSE button. TRACKING ADJUSTMENT TV/VCR • Tracking adjustment will be set automatically (Digital Tracking function) when you start playback. • However when playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, you can adjust the tracking control manually by pressing the CHANNEL button K or L until the streaks disappear. To return to the DTR function, stop the tape once and start playback again. • You can reduce the noise lines by pressing the CHAN- NEL button K or L in slow mode, too. Tracking adjustment in Slow mode will not be set automatically. SLOW MOTION TV/VCR During pause, press the FWD button to reduce the playback speed. The TV/DVD/VCR mutes the sound during slow motion. Press the PLAY button to return to normal playback. NOTE: If it is left in the Slow mode for more than five minutes, the TV/DVD/VCR will automatically go into the Stop mode. PICTURE SEARCH TV/VCR This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)You may view a video tape at a high speed in either a forward or reverse direction by pressing the F.FWD or REW button during playback. (in the SP / LP / SLP modes) NOTE: •If you press the F.FWD or REW button on the front panel in the DVD mode, the VCR forward or reverse will start. Please press the STOP/EJECT button once to stop it, twice to eject it. 2)Press it again and the TV/DVD/VCR will now search in super high speed. (in the LP / SLP modes only) NOTE: • Tapes recorded in the SP or LP mode will dis- play a noise bar on the TV screen and the picture may revert to Black and White. This is normal. 3)Press the PLAY button to return to normal speed. STILL PICTURE TV/VCR You can view a still picture on the TV screen during playback (the Still mode). Press the PAUSE button during playback. Only tapes recorded in the SLP mode will show the least amount of lines. Press the PLAY button to return to playback. NOTES: • You can advance the picture one frame at a time by pressing the PAUSE button during the Still mode. • If it is left in the Pause mode for more than five min- utes, the TV/DVD/VCR will automatically switch to the Stop mode. VERTICAL HOLD CONTROL TV/VCR In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL button K or L. NOTE: If there are video noise lines on the screen, see Tracking Adjustment section. - 26 - EN 1C29