Symphonic SC91B Owner's Manual - Page 23

Notes: • The picture will not be as good as in normal playback (SP or LP) during Visual Search. • When video searching a pre-recorded tape, it may cause noise bars (white lines) to move vertically. Also, the picture color fluctuates on and off. This is not an indication of trouble. • You will get best results when playing back tapes that were recorded in the SLP mode. REW F.FWD SUPER HIGH SPEED SEARCH (LP/SLP MODE) For Visual Search in super high speed, press either F.FWD or REWIND button while the unit is in the play mode. Release button, then depress again and hold for approximately one second. The unit will now search in super high speed. For normal playback, simply press PLAY button. Note: Tape recorded in the LP, SLP mode will display a noise bar on the TV screen and the picture may revert to Black and White. This is normal. STILL FRAME DURING PLAYBACK If you press PAUSE button during playback, the picture will "freeze" on the TV screen. Only recorded tape in SLP mode shows clear picture. You may use this feature to study details of a particular screen. Press PLAY button again to continue playback. Note: The VCP will automatically switch to the Stop mode, if it is left in the Pause mode for more than five minutes. NOISE CANCELLING If you use the PAUSE button to freeze the picture during playback with tape recorded in SLP mode, usually there will be video "noise bars" on the TV screen. This is normal, however, this VCP has a special feature that allows you to reposition or reduce the lines. Each time you press PAUSE button the lines will change position on the TV screen. This enables you to see the picture in its entirety without distracting noise lines. If the tape was originally recorded in SP or LP mode, the still picture will, in addition to the "noise bars", be black and white. THIS IS NOT A FAULT OF THE MACHINE BUT MERELY A BY-PRODUCT OF THE TECHNOLOGY INVOLVED IN PRODUCING A VCP WITH LONG-PLAY MODE. TRACKING ADJUSTMENT When playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture. If this occurs, adjust the TRACKING control by pressing CHANNEL "A", "A" or "v", "V" button until the streaks disappear. To set to center position, press both "A" and "v" buttons at the same time. (This function is operative only by buttons on Main Unit.) "".", CHANNEL LI Main unit Remote control unit Note: Tapes recorded on other VCR's may require adjustment. If you encounter video "noise bar" during playback adjust tracking control to achieve the best picture. DEGAUSS Magnetism from nearby appliances might affect the color of the TV picture. If this happens, move the VCP away from the appliance. If the color is still not correct, be power off then be power on. - 23 -