Symphonic WF32L6 Owner's Manual - Page 23

WATCHING TV / OPTIONAL SETTINGS OPTIONAL SETTINGS SLEEP TIMER The Sleep Timer function will automatically turn off the power of the unit at a preset time. POWER INPUT SLEEP SELECT 12 45 78 -0 SETUP 3 6 AUDIO 9 STILL SCREEN MODE ENTER 1 Use Sleep Timer. • Press [SLEEP] on the remote control. • The setting display for Sleep Timer is shown on the screen. Sleep Off 2 Set the timer. • You can select 10, 20, 30, 40, 50, 60, 70, 80 and 90 minutes by pressing [SLEEP]. (You cannot set the timer per one minute. ) • You can set the timer up to 90 minutes. • After setting, you can check the remained time per 1 minute by pressing [SLEEP]. • To cancel the sleep timer, press [SLEEP] repeatedly until "Sleep Off" is displayed. • The Sleep Timer setting display will automatically disappear in a few seconds. Sleep Off NOTE: • When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be cancelled. SETUP SCREEN This section describes the overview of the setup screen displayed when you press [SETUP]. For more details, see the reference page for each item. The setup screen consists of the function setting items below. • To exit settings. • You can adjust the picture quality (Picture Mode, Brightness, Contrast, Color, Tint, Sharpness, Color Temp., and Energy Saving). (Refer to "PICTURE ADJUSTMENT" on page 24.) • You can automatically scan the receivable channels and watch or skip the channel as necessary. (Refer to "AUTOSCAN" on page 13.) • You can change the display format for Closed Caption as well as varied font styles, which displays the dialogue of a TV program or other information across the screen. (Refer to "CLOSED CAPTION" on page 25.) Also, can set the viewing limitations such as V-Chip of the MPAA rating and the TV rating. (Refer to "V-CHIP" on page 28.) HDMI Audio if the TV is connected to a digital external device such as DVD player. (Refer to "HDMI AUDIO" on page 31.) • You can change the language (English, Spanish, French) displayed in the setup screen. (Refer to "LANGUAGE SELECTION" on page 17.) NOTE: • To move to the normal screen, press [SETUP]. 23 EN