TASCAM CD-6010 Owners Manual - Page 16

– Preparation, Making connections

Get TASCAM CD-6010 PDF manuals and user guides View all TASCAM CD-6010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

3 - Preparation Making connections The illustration below shows an example of connecting other equipment with a CD-6010. Precautions before making connections •• Before connecting other devices to the unit, read their manuals carefully. •• Turn off the power (or put power into standby mode) for this unit and all equipment that will be connected to it. •• Connect all the devices to the same power supply line. When using a power strip, for example, use a thick cable with a high current capacity to minimize variation in the power voltage. TASCAM RC-20 Direct Play Remote (sold separately) TASCAM RC-3F Footswitch (sold separately) Headphones USB External controller ANALOG IN (BALANCED) ANALOG IN (UNBALANCED) Analog inputs of mixers, recorders, ampli ers, etc. DIGITAL IN (COAXIAL) DIGITAL IN (AES/EBU) Digital inputs of mixers, recorders, ampli ers, etc. Computer Connecting a footswitch Connect a TASCAM RC-3F footswitch (sold separately) to the REMOTE connector to enable it to control some unit operations. (See "Controlling the player with a footswitch" on page 33.) Connecting a direct play remote Connect a TASCAM RC-20 direct play remote (sold separately) to the REMOTE connector to enable it to control some unit operations. (See "Controlling the player with a direct play remote" on page 34.) Connecting headphones Connect stereo headphones to the PHONES jack on the front panel. Use the LEVEL knob to adjust the volume. CAUTION Before connecting headphones, turn the LEVEL knob to minimize the volume. Failure to do so might cause sudden loud noises, which could harm your hearing or result in other trouble. Connecting with a computer Connect the RS-232C connector on this unit to a RS-232C connector on a computer to allow serial control of this unit from that computer. After connecting the unit to a computer, make transmission settings correctly on this unit. (See "Using the RS-232C connector" on page 34.) 16 TASCAM CD-6010

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
16
TASCAM CD-6010
3 – Preparation
Making connections
The illustration below shows an example of connecting other equipment with a CD-6010.
Precautions before making connections
Before connecting other devices to the unit, read their manuals carefully.
•
Turn off the power (or put power into standby mode) for this unit and all equipment that will be connected to it.
•
Connect all the devices to the same power supply line. When using a power strip, for example, use a thick cable with a
•
high current capacity to minimize variation in the power voltage.
TASCAM RC-3F
Footswitch
(sold separately)
TASCAM RC-20
Direct Play Remote
(sold separately)
Headphones
External controller
Computer
USB
DIGITAL
IN
(COAXIAL)
Digital inputs of mixers,
recorders, amplifiers, etc.
ANALOG
IN
(UNBALANCED)
Analog inputs of mixers,
recorders, amplifiers, etc.
ANALOG IN
(BALANCED)
DIGITAL IN
(AES/EBU)
Connecting a footswitch
Connect a TASCAM RC-3F footswitch (sold separately) to
the
REMOTE
connector to enable it to control some unit
operations. (See “Controlling the player with a footswitch”
on page 33.)
Connecting a direct play remote
Connect a TASCAM RC-20 direct play remote (sold
separately) to the
REMOTE
connector to enable it to
control some unit operations. (See “Controlling the player
with a direct play remote” on page 34.)
Connecting headphones
Connect stereo headphones to the
PHONES
jack on the
front panel. Use the
LEVEL
knob to adjust the volume.
CAUTION
Before connecting headphones, turn the LEVEL knob to
minimize the volume. Failure to do so might cause sudden
loud noises, which could harm your hearing or result in other
trouble.
Connecting with a computer
Connect the
RS-232C
connector on this unit to a RS-232C
connector on a computer to allow serial control of this
unit from that computer.
After connecting the unit to a computer, make
transmission settings correctly on this unit. (See “Using
the RS-232C connector” on page 34.)