TASCAM CD-6010 Owners Manual - Page 21

5 - Operation Loading discs Inserting a disc To load a CD, press the OPEN/CLOSE button on the unit or the EJECT button on the remote control to open the disc tray. Load the disc with its label side up. Press the OPEN/CLOSE button or the EJECT button again to close the disc tray. After a disc is loaded, the player will read its information. If it is an audio CD, the display will show the total number of tracks and total playback time. If it is a data CD, the display will show the total number of tracks in the current folder. NOTE You can also press the Á [PLAY] button to close the disc tray and start playback immediately instead of pressing the OPEN/CLOSE button or the EJECT button again to close the disc tray. Ejecting a disc Press the OPEN/CLOSE button on the player or EJECT button on the remote . Remove the disc after the tray opens. NOTE •• In order to reduce the disc ejection time, the tray opens before the disc stops spinning completely. •• The OPEN/CLOSE button functions when the power is ON. If you must remove a disc when the power is OFF, insert a paperclip or similar stiff rod into the hole beneath the tray and push to open the tray. Tray lock function The tray lock function allows you to disable the operation of the OPEN/CLOSE button on the player during playback and when paused in order to prevent playback from being interrupted if this button is pressed accidentally. To turn the tray lock function on, set the 02 TRAY menu item to LOK (default value: OFF). NOTE The tray lock function on/off setting is maintained even when the player's power is turned off. Playing back a CD The following procedures assume that the necessary connections have been completed, the player's power has been turned on and a CD (audio or data) has been loaded. To start playback, press the Á [PLAY] button on the player or the Á PLAY button on the remote. Stopping playback Press the ª STOP [INTRO CHECK] button on the player or the ª STOP button on the remote. Pausing playback Press the π [PAUSE] button on the player or the π PAUSE button on the remote. To restart playback, press the Á [PLAY] button on the player or the Á PLAY button on the remote. NOTE In this manual, unless stated otherwise, explanations assume that continuous playback mode is enabled. (See "Playback modes" on page 23.) TASCAM CD-6010 21