TASCAM CD-6010 Owners Manual - Page 28

6 - Various Playback Functions Using the remote control: Press the PITCH button to turn the pitch control function on. Use the + and − buttons to adjust the setting in the range between −16% and +16%. Setting the pitch adjustment increment To set the adjustment increment for pitch control playback (pitch step) use the 12 P-STEP menu item. Options (%): 0.1 (default value), 0.5, 1.0 NOTE The pitch step setting is retained even when the power is turned off. Changing playback speed without changing pitch (KEY ORIG) Ordinarily, when using the pitch control function, the speed changes along with the pitch. When the original key function is on, however, the pitch does not change even when the playback speed is changed. Use one of the following procedures to turn the original key function on/off. •• Press the KEY ORIG button on the remote. •• Use the 01 Origin menu item (default value: OFF). When the original key function is on, KEY ORIG appears at the bottom of the display. NOTE The original key function on/off setting is retained even when the power is turned off. Program playback By setting a program in advance, you can set the unit to play tracks in the order that you want. Up to 100 tracks can be added to the program. To use program playback to play tracks in the program order, set the playback mode to program playback mode and start playback. (See "Selecting the playback mode" on page 23.) Program setting mode Use the following procedures to enter program setting mode and add tracks to the empty program. NOTE •• You can add tracks to the program regardless of the current playback mode. •• You can add the same track to the program multiple times. •• The program setting is retained even when the power is turned off or the disc is ejected. The player can remember one program for up to 100 discs. Using the front panel buttons: 1 When playback is stopped, select the 04 Prog menu item, and press the TRACK SKIP/DATA knob to enter program setting mode. The display appears as follows. Track number Program number 2 Use the number buttons or TRACK SKIP/DATA knob to select the number of the track that you want to add at the currently displayed program number. The selected track number blinks. 3 Press the SEARCH  [AUTO READY] button to add the selected track. The next program number is shown. 4 Repeat steps 2 and 3 to add tracks as desired. NOTE After selecting a track, turning the TRACK SKIP/DATA knob to the right or pressing the SEARCH  [AUTO READY] button adds the track to the program. If you exit program setting mode without doing this, the track selected just before will not be added to the program. 5 When you are done adding tracks to the program, press the TRACK SKIP/DATA knob to exit program setting mode. Using the remote control: 1 When stopped, press the PGM button to enter program setting mode. The display appears as follows. Track number Program number 28 TASCAM CD-6010