TASCAM CD-6010 Owners Manual - Page 27
Intro check mode, Power on play function, Pitch control playback, Using the front panel buttons
View all TASCAM CD-6010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
6 - Various Playback Functions Intro check mode The Intro Check mode allows 10-second track beginnings to be played in succession. Use the following procedures to enable this mode. Using the front panel buttons: 1 When stopped and in shift mode (SHIFT indicator lit), press the ª STOP [INTRO CHECK] button. You can also do this by pressing the STOP [INTRO CHECK] button while pressing and holding the SHIFT button. INT appears on the right side of the display. Appears Power on play function By using a commercially-available external timer, you can make the player turn on at desired times and start playback. 1 First, connect the power of this unit so that it receives power from the timer. 2 Load the disc that you want played back. 3 Set the 07 P onPL menu item to ON (default value: OFF). M S F NOTE Intro check mode cannot be enabled together with single playback mode or random playback mode. 2 Press the Á [PLAY] [REPEAT] button to activate the intro check mode starting from the next track. 3 Press the ª STOP [INTRO CHECK] button again to stop the play and disable intro check mode. Using the remote control: 1 When stopped or paused, press the remote INTRO CHECK button to enable intro check mode. INT appears on the right side of the display. Appears M S F 4 Leave the POWER switch of this unit set to ON, turn the power off from the timer and set the timer to turn on at the desired time. At the set time, the timer should supply power to the player, turning it on, and playback should begin automatically. NOTE The power on play function on/off setting is retained even when the power is turned off. Pitch control playback Using its pitch control playback function, this unit can vary the pitch (and speed) of playback. Follow these procedures to use pitch control playback. When this function is on, PITCH and the setting value appear in the PITCH display area on the right side of the display. Current value NOTE If you press the INTRO CHECK button on the remote control during playback, INT appears on the right side of the display and intro check starts immediately. 2 If stopped or paused, press the Á PLAY button to start intro check. 3 Press the ª STOP button to stop playback and disable intro check mode. Press the INTRO CHECK button again to disable intro check mode and continue playback. M S F Using the front panel buttons: When in shift mode (SHIFT indicator lit), press the JOG [PITCH] button to turn the pitch control function ON. You can also do this by pressing the JOG [PITCH] button while pressing and holding the SHIFT button. After pressing the SHIFT button, press the MENU [PITCH %] button to enter pitch setting mode and use the TRACK SKIP/DATA knob to adjust the setting in the range between −16% and +16%. The pitch setting value blinks while it is being set. You can also enter pitch setting mode by pressing the MENU [PITCH%] button while pressing and holding the SHIFT button. After making the setting, press the SHIFT button and then the MENU [PITCH%] button to exit pitch setting mode. You can also exit pitch setting mode by pressing the MENU [PITCH%] button while pressing and holding the SHIFT button. TASCAM CD-6010 27