TASCAM CD-6010 Owners Manual - Page 38

10 - Specifications Media and formats Device type CD player Compatible discs Compact discs (12cm/8cm, including CD-R discs) Playable disc types CD-A, CD-ROM (ISO9660 LEVEL 1/2/JOLIET format) Playable file formats Audio CD (CD-DA), MP3 (MPEG Audio Layer III), WAV MP3 playback specifications Audio Modes: stereo/mono Sampling Frequency: 32 kHz/44.1 kHz/48 kHz Bit Rate: 32 kbps-320 kbps and VBR WAV playback specifications Sampling Frequency: 32 kHz/44.1 kHz/48 kHz Sampling Bit Rate: 16 bit Audio CD playback specifications Sampling Frequency: 44.1 kHz Sampling Bit Rate: 16 bit Number of Channels: 2 Analog audio output Analog outputs (unbalanced) Connector: RCA pin jacks Output impedance: 200 Ω Standard output level: −10 dBV (0.32 Vrms) Maximum output level: +6 dBV (2.0 Vrms) Analog outputs (balanced) Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD) Output impedance: 100 Ω Standard Output level: +4 dBu (1.23 Vrms) Maximum Output level: +24 dBu (12.28 Vrms) PHONES connector Connector: 6.3mm (1/4") standard stereo jack Maximum output level: 45 mW + 45 mW or more (THD+N 0.1% or less, 32Ω load) Digital audio output Digital output connector (COAXIAL) Connector: RCA pin jack Supported signal formats: IEC 60958-3 standard for consumer use, IEC 60958-4 for professional use Output impedance: 75 Ω Output level: 0.5 Vp-p Digital output connector (XLR) Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD) Supported signal formats: IEC 60958-3 standard for consumer use, IEC 60958-4 for professional use Output impedance: 110 Ω Control input and output REMOTE connector Connector: 2.5mm TRS jack RS-232C connector Connector: D-sub 9-pin (female, inch standard) CONTROL I/O PARALLEL connector Connector: D-sub 25-pin (female, inch standard) Audio performance Frequency response 20 Hz-20 kHz: ±0.5 dB (JEITA) S/N ratio 95 dB or more (JEITA) Dynamic range 95 dB or more (JEITA) Distortion 0.005% or less (JEITA) Channel separation 95 dB or more (1 kHz, JEITA) 38 TASCAM CD-6010