TASCAM CG-1800 Owners Manual - Page 19

6 - Operations using USB flash drives Overview You can use the following functions by connecting a USB flash drive to this unit's USB port. • Write the unit's preset settings data • Save the unit's operation log • Load backed up setting data from the USB flash drive • Update the unit's system firmware Connecting/disconnecting USB flash drives Connecting a USB flash drive Insert a USB flash drive into this unit's USB port. NOTE You can insert a USB flash drive when the unit is on or off. Disconnecting a USB flash drive After reading/writing completes, disconnect the USB flash drive. CAUTION Never turn the power off when, for example data is being written to or read from a USB flash drive. Doing so could cause data not to be written or read correctly, cause written or loaded data to be lost or otherwise impede the operation of the unit. Exporting presets to USB flash drives You can export presets that have been saved in this unit to USB flash drives. This can be done from the UTILITY 2 page. 1. Press the MENU button repeatedly to open the UTILITY 2 menu page, and turn the MULTI JOG dial to select the PRESET IMP/EXPORT item. 2. Press the MULTI JOG dial to open the IMP/EXPORT screen. 4. Press the MULTI JOG dial to show the EXPORT FROM item on the IMP/EXPORT screen. 5. Turn the MULTI JOG dial to select the preset number that you want to export. Select SYS ALL to export all the current menu settings and presets 1- 4 as a single settings file. Options: PRESET 1, PRESET 2, PRESET 3, PRESET 4, SYS ALL 6. Press the MULTI JOG dial to open a pop-up message where you can confirm the name of the preset to export. When a single preset number is selected When SYS ALL is selected 7. Press the MULTI JOG dial to start exporting from this unit to the USB flash drive. NOTE Before pressing the MULTI JOG dial, press the EXIT/CANCEL button to cancel exporting and return to the menu screen. 8. After exporting completes or is canceled, the unit will return to the state shown in step 4. Repeat steps 5 - 7 if you want to export additional preset data. NOTE The file name with the exported data includes the date and an id number that is assigned consecutively. Even if the USB flash drive contains a file with data for the same preset number, it will not be overwritten when the new file is saved. 3. Turn the MULTI JOG dial to set the MODE item to EXPORT. TASCAM CG-1800/CG-1000 19