TASCAM CG-1800 Owners Manual - Page 20

6 - Operations using USB flash drives Importing presets from USB flash drives Preset data exported to a USB flash drive can be imported to this unit's preset memory. This can be done from the UTILITY 2 page. 1. Press the MENU button repeatedly to open the UTILITY 2 menu page, and turn the MULTI JOG dial to select the PRESET IMP/EXPORT item. 7. If you selected data for a preset on the USB flash drive, turn The MULTI JOG dial to select the preset number to which you want to import that data. Options: PRESET 1, PRESET 2, PRESET 3, PRESET 4 8. Press the MULTI JOG dial to open the import confirmation screen. When data for a single preset is selected 2. Press the MULTI JOG dial to open the IMP/EXPORT screen. 3. Turn the MULTI JOG dial to set the MODE to IMPORT. When SYS ALL is selected 9. Press the MULTI JOG dial to start importing from the USB flash drive to this unit. 4. Press the MULTI JOG dial to open the IMPORT FROM screen. The preset and SYS ALL data saved on the USB flash drive will appear in a list. 5. Turn the MULTI JOG dial to select the preset that you want to import. NOTE Presets with the same numbers can be distinguished by their dates and id numbers. 6. Press the MULTI JOG dial. If you selected data for a preset on the USB flash drive, the IMPORT TO screen will open. NOTE Before pressing the MULTI JOG dial, press the EXIT/CANCEL button to cancel importing and return to the menu screen. 10. After importing completes or is canceled, the unit will return to the state shown in step 4. Repeat steps 5 - 7 if you want to import additional preset data. CAUTION After importing completes, preset data previously stored will be overwritten. This procedure cannot be reversed. If you selected SYS ALL data, the import confirmation screen shown in step 8 will appear (skip step 7). 20 TASCAM CG-1800/CG-1000