TASCAM CG-1800 Owners Manual - Page 7

1 - Introduction Precautions for placement • The guaranteed operating temperature of this unit is between 0 ºC and 40 ºC (32 ºF and 104 ºF). • Do not install the unit in the following types of places. Doing so could degrade its performance or cause malfunction. Places with frequent vibrations Near windows or other places exposed to direct sunlight Near heaters or other extremely hot places Extremely cold places Places with high humidity or bad ventilation Very dusty places • To assure good heat dissipation, do not place anything on top of the unit. • Do not place this unit on top of any heat-generating device such as a power amplifier. Power supplies • Insert the included power cord completely into the AC IN connector. • Connect the unit to the standard power outlet. • Hold a power cord by its plug when connecting and disconnecting it. • When connecting two power supplies for power redundancy, use separate power circuits that do not affect each other. Condensation Condensation could occur if this unit is moved from a cold place to a warm place, is used immediately after a cold room has been heated or is otherwise exposed to a sudden temperature change. If condensation occurs, leave the unit for one or two hours before supplying power to it. Cleaning the unit To clean the unit, wipe it gently with a soft dry cloth. Do not wipe the unit with chemical cleaning cloths, benzene, paint thinner, alcohol or other chemical agents because they could damage its surface or cause discoloration. USB flash drives USB flash drives can be used with this unit. A list of USB flash drives that have been confirmed to operate with this produce is available on the TEAC Global Site (http:// teac-global.com/). Handling precautions USB flash drives are made with precision. In order to avoid damaging them, please observe the following precautions when handling them. • Do not leave them in places that are extremely hot or cold. • Do not leave them in places that are extremely humid. • Do not get them wet. • Do not place objects on top of them or twist them. • Do not subject them to strong impacts. • Do not insert or remove them during data transfer or at other times they are being accessed by the unit. • When transporting them, put them inside cases or otherwise cover them. Using the TEAC Global Site You can download the Owner's Manual necessary for this unit from the TEAC Global Site (http://teac-global.com/). 1. Open the TEAC Global Site (http://teac-global.com/). 2. In the TASCAM Downloads section, click the desired language to open the Downloads website page for that language. NOTE If the desired language does not appear, click Other Languages. 3. Click the product name in the "Search by Model Name" section to open the Downloads page for that product. 4. Select and download the Owner's Manual that are needed. User registration Customers in the USA, please visit the TASCAM website (http:// tascam.com/) to register as a user online. 7 TASCAM CG-1800/CG-1000