DA-6400/DA-6400dp
16
TASCAM
DA-6400/DA-6400dp
4.
Operations on the
START/END POINT
screen are some-
what different than on other screens.
Control assignments are shown at the top right of the screen.
1
When the frame cursor is visible, turn the
MULTI JOG
dial
to move the cursor.
2
±
When the frame cursor is visible, press the
MULTI JOG
dial
to switch to the solid cursor.
3
±
When the solid cursor is visible, press the
MULTI JOG
dial
to switch to the frame cursor.
4
±
When the solid cursor is visible, turn the
MULTI JOG
dial
to change the setting at the cursor position.
Turn the
MULTI JOG
dial while pressing and holding the
SHIFT
button to make large setting changes.
However, the solid cursor is always visible on
RESET>>
and
<<CURRENT
. Turning the
MULTI JOG
dial will move
the cursor, and pressing the
MULTI JOG
dial will execute
the
RESET>>
or
<<CURRENT
operation.
With
RESET>>
, press the
MULTI JOG
at the
START
line
to reset to the beginning of the take or at the
END
line to
reset to the end of the take.
In either case, a confirmation pop-up message will appear
before resetting. Press the
MULTI JOG
dial to reset it.
With
<<CURRENT
, press the
MULTI JOG
dial to capture
the current playback position to a cursor line.
NOTE
Editing operations are also possible using a USB keyboard.
o
Press the ENTER key to switch between the frame cursor
and solid cursor.
o
Use the up and down cursor keys to change settings.
o
Use the left and right cursor keys to move the cursor.
o
Numbers can be input when the solid cursor is on a numer-
ical value.
5
Use transport operations on the
START/END POINT
screen to conduct rehearsal playback.
o
Use the
.
and
/
buttons to move between the
file start, the
Start Point
, the
End Point
and the
file end. Otherwise, transport operations are as usual.
o
If you change the
Start Point
, the playback position
will move to that point. If it is changed during playback,
playback will continue after moving to this playback po-
sition.
o
If you change the
End Point
, the playback position
will move to 2 seconds before that point. If it is changed
during playback, playback will continue after moving to
this playback position.
o
Depending on the
PREVIEW
setting at the top right of
the screen, the content of rehearsal playback will be dif-
ferent.
Rehearsal playback when PREVIEW OFF
Press the
7
button to start playback from the cur-
rent position. Playback and movement are possible
outside the range between the
Start Point
and
the
End Point
.
Rehearsal playback when PREVIEW ON
Press the
7
button to start playback from the cur-
rent position. In this case, playback is only possible
inside the range between the
Start Point
and
the
End Point
. Movement outside this range is not
possible.
5.
When done editing, press the
EXIT
button to return to the
original screen.
Recording in Playlist Mode
Recording is possible even when using Playlist Mode.
When a take is recorded, it is automatically added as the next en-
try after the highest numbered entry that has an assigned take in
the current playlist.
Example:
Playlist before recording
Playlist after recording
NOTE
If a take has been assigned to entry 999, which is the last play-
list entry, pressing the
0
[
SPLIT
] button will cause the follow-
ing pop-up message to appear. Recording will not be possible.
1
11
12
13
14
15
16
17
18
19
20
21
