TASCAM DA-6400 DA-6400dp Owners Manual Addendum V2.10 - Page 28

DA-6400/DA-6400dp New functions in firmware version 1.30 The following new functions have been added in firmware version 1.30. 00DA-6400 Control iPad remote control app support added 00TASCAM IF-AE16 AES/EBU interface card support added 00Function added to synchronize with SMPTE timecode and play the current take 00VAMPING mode added to repeat playback function modes 00Function added to set the input and output signal routing for each individual channel 00On/off setting added for NO SIGNAL error checking function 00Function added that requires pressing and holding the button to stop recording TASCAM DA-6400 Control iPad remote control app support added The TASCAM DA-6400 Control iPad remote control app is now supported. TASCAM IF-AE16 AES/EBU interface card support added The TASCAM IF-AE16 AES/EBU interface card is now supported. If installed in SLOT 1 or SLOT 2 of this unit, the following appears on the SLOT1 or SLOT2 menu page. NOTE ii When the slot with the IF-AE16 card installed is selected to be the clock master, you can also set the CLOCK LINE item on the CLOCK screen that opens from the GENERAL page CLOCK MASTER item. Moreover, if the slot with the IF-AE16 installed is selected to be the clock master, you can also change the setting by moving the cursor to APPLY and pressing the MULTI JOG dial. CLOCK LINE If the slot with the IF-AE16 card installed is selected to be the clock master for the unit, this selects the signal line to use as the clock master. ii If the SRC item is set to ON for a signal line, it cannot be selected as the master clock In this case, the following pop-up window appears. A confirmation pop-up message appears.A confirmation pop-up message appears. Options: A ES 1-2 (default), AES 3-4, AES 5-6, AES 7-8, AES 9-10, AES 11-12, AES 13-14, AES 15-16 28 TASCAM DA-6400/DA-6400dp