TASCAM DA-6400 DA-6400dp Owners Manual Addendum V2.10 - Page 30

DA-6400/DA-6400dp TC RECHASE THRESHOLD This sets the synchronization inaccuracy threshold used to start rechasing. If this happens, no take at current time will appear in the take name display area on the Home Screen. Options: 1 /3frame, 1frame, 2frame (default), 5frame, 10frame Procedures for synchronized playback 1. Make the take to use for synchronized playback the current take. 2. Do one of the following to start synchronized operation. oo Press the 9 [CHASE] button while pressing and holding the SHIFT button on the front of the unit. oo Set the TC SYNC page TC CHASE MODE item to ON. If the unit was stopped when this is turned on, the unit enters playback standby. At this time, the indicator on the Home Screen changes to the indicator and blinks. The take number display on the Home Screen also disappears. 3. When input timecode starts during playback standby, the unit will automatically start playback, and the indicator on the Home Screen will stop blinking. If the input timecode does not match the current take, audio output will not be possible. If the input timecode matches the current take, its audio will be output and the take name will appear in the take name display area on the Home Screen. 4. During timecode synchronized playback, press the 8 button to stop playback. At this time, the indicator on the Home Screen will blink. 5. When stopped, press the 7 or 9 [CHASE] button to start timecode synchronized playback. 6. Do one of the following to turn synchronized operation off. oo Press the 9 [CHASE] button while pressing and holding the SHIFT button on the front of the unit. oo Set the TC SYNC page TC CHASE MODE item to OFF. At this time, the indicator on the Home Screen reverts to the indicator. VAMPING mode added to repeat playback function modes VAMPING has been added to the repeat playback function modes. On the PLAY SETUP menu page, the following three options have been added for the REPEAT MODE item. Option OFF (default value) Repeat icon Meaning Repeat playback is not used. NORMAL Normal repeat playback is used. VAMPING This is the new repeat playback function mode added with this update. When this mode is active, is added to the repeat icon on the Home Screen. During repeat playback, after the 7 button is pressed the repeat icon will blink until playback of the next take starts. When playback of the next take starts, the will stop blinking. NOTE ii If the 7 Button is pressed during playback of the final 5 sec- onds of the current take, the following message is displayed, and that take will be repeated from its start to end one more time before proceeding to play the next take. In this case, the will start blinking after returning to the beginning of the take. Operation in VAMPING REPEAT MODE When set to this mode, the current take will be played back repeatedly regardless of the PLAY MODE screen setting. During repeat playback, press the 7 button* to automatically move to the next take and repeat playback after playing the current take to its end. * In addition to the front panel button, parallel, serial, or network control can be used to start playback. ii While waiting to move to the next take (when is blinking), operations including stopping, pausing, searching/backward, skipping and jumping to marks will cancel moving to the next take, and the current take will continue to repeat playback. In this case, the will stop blinking. 30 TASCAM DA-6400/DA-6400dp