TASCAM DM-24 Installation and Use Quick Start Guide - Page 13

DM-24 Quick Start Guide Snapshot recall The DM-24 allows almost all mixer settings to be stored as part of a snapshot which can be stored and recalled. There are also libraries available for EQ settings, for effects settings and for dynamic processor settings. The top of the display will show you what snapshot you're using at any given time. To the left of the display are the LIBRARY keys. Pressing the + or keys allows you to browse snapshots. Pressing RECALL will load the snapshot in the display. There is also an option that allows you to recall a snapshot by pressing ONLY the + or key. With the SHIFT key unlatched press the LIBRARY key. Press the soft key under LIBRARY. A small pop up screen will let you choose which type of snapshot you want to recall. Choose SNAPSHOT by using the first POD knob and the ENTER key. Your snapshot library will now appear. Use the data dial to choose MIXING and press the soft key under RECALL. All of the DM-24's parameters have now been changed to the appropriate settings for mix down. Use the data dial to choose RECORDING and press the soft key under RECALL. All of the DM24's parameters have now been changed to the appropriate settings for tracking. A full list of the settings in these snapshots is included in this quick guide (Refer to page 16). Consider these two shapshots as a good starting place. You may need to make changes and store your own snapshots to fit your personal needs. 13