TASCAM EZ CONNECT wner s Manual - Page 24

3 - TASCAM EZ CONNECT TASCAM EZ CONNECT is control software with a simple and easy to understand interface designed for end-users. With source selection and volume screens, the control contents can be customized using TASCAM MX CONNECT. By assigning only the necessary functions, unintended operation mistakes and trouble by end users can be avoided, enabling facility managers to use it with peace of mind. Connecting TASCAM EZ CONNECT with an MX-8A The AREA tab contents set using TASCAM MX CONNECT are saved in the MX-8A unit. Using this setting information, TASCAM EZ CONNECT can connect to the MX-8A. 1. The login screen will appear when TASCAM EZ CONNECT is launched. Using TASCAM EZ CONNECT in demo mode In demo mode, TASCAM EZ CONNECT can be tried without an MX-8A unit. In demo mode, you can try operations on the Source Selection Screen. NOTE When used in demo mode, MX-8A unit settings cannot be changed. 1. Tap the button at the bottom left of the login screen. This opens a pop-up menu. Source Selection Screen Volume Screen When the Source Selection Screen is open, tap to open the Volume Screen. When the Volume Screen is open, tap to open the Source Selection Screen. NOTE ii Items that have been enabled on the TASCAM MX CONNECT EZ CONNECT page can be accessed on the TASCAM EZ CONNECT source selection screen. Items will not be shown if the following settings are made on the EZ CONNECT page. • CONTROL TARGET is set to OFF • A source is set for CONTROL TARGET, but the input source is OFF ii If the EZ CONNECT page VOLUME setting area (5) Enable does not have a check mark (4), the Volume Screen will not appear in TASCAM EZ CONNECT. Moreover, if all the volume settings are OFF, the Volume Screen will not appear in TASCAM EZ CONNECT. 2. Input the AREA password for the area that you want to log into and tap the button. (see "EZ CONNECT page" on page 21) After logging into TASCAM EZ CONNECT, the name set in the AREA NAME setting field on the EZ CONNECT page will be shown. 2. Tap the Demo mode button to enable use in demo mode. "Demo Mode" appears at the top left of the screen when demo mode is active. NOTE ii To log out, tap the 6 at the top right of the screen that appears after logging in. ii Both TASCAM MX CONNECT and TASCAM EZ CONNECT can be logged into an MX-8A at the same time. TASCAM EZ CONNECT will be logged out automatically, however, if settings are changed on the EZ CONNECT page in TASCAM MX CONNECT. TASCAM MX CONNECT 24