TASCAM EZ CONNECT wner s Manual - Page 26
Setting the Volume Screen, Setting volume and muting on the Source Selection Screen
View all TASCAM EZ CONNECT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3 - TASCAM EZ CONNECT Setting volume and muting on the Source Selection Screen Place a check (4) in "Visible target volume and mute" to show a volume slider, which controls the MIX master channel fader, and mute button in TASCAM EZ CONNECT. Setting the Volume Screen NOTE If the EZ CONNECT page VOLUME setting area (5) Enable does not have a check mark (4), the Volume Screen will not appear in TASCAM EZ CONNECT. Moreover, if all the volume settings are OFF, the Volume Screen will not appear in TASCAM EZ CONNECT. 1. To enable volume control in TASCAM EZ CONNECT, put a check (4) in VOLUME Enable. Four volume selection fields are shown for volume operation in TASCAM EZ CONNECT. NOTE The volume values shown in TASCAM EZ CONNECT correspond to the TASCAM MX CONNECT faders as follows. TASCAM EZ CONNECT value shown 100 90 80 70 60 50 40 30 20 10 0 TASCAM MX CONNECT value shown +10 dB +4.8 dB 0 dB -3.2 dB -6.6 dB -11.7 dB -18.9 dB -26.9 dB -34.8 dB -45.8 dB -inf. 2. Tap these areas to show volume control target lists. Select the channel for volume control in TASCAM EZ CONNECT. TASCAM MX CONNECT 26