TEAC CRH238I Owners Manual - Page 9
TEAC CRH238I Manual
View all TEAC CRH238I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ENGLISH A AUX1/AUX2 jacks These jacks transmit an analog 2-channel audio signal. Connect the components using commercially available RCA pin cables. Make sure to connect the cables as follows: white plug q white jack (L: left channel) red plug q red jack (R: right channel) < Be sure to insert each plug securely. To prevent humming and interference, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables. B iPod Dock Connect the Dock to the iPod port. < Make sure the "SIDE A" label on the plug is facing down. < Securely insert the plug until a slight "click" is heard. To disconnect the Dock: Squeeze both sides of the plug and pull. D S-VIDEO OUT terminal This terminal outputs video signal from iPod. Use a commercially available S-Video cable to connect the Dock to the S-Video input of a suitably equipped television or monitor. Use this connection in preference to a composite video connection. E DIGITAL OUT terminal (optical) Digital 2-channel audio signal is output from this terminal. Connect it to the digital input terminal of a digital device such as a CD recorder, MD deck, etc. Use a commercially available optical digital cable. < Remove the protective cap from the DIGITAL OUT terminal before connecting. F AC Power Cord After all other connections have been completed, connect the plug to an AC wall socket. Be sure to connect the power cord to an AC outlet which supplies the correct voltage. Hold the power plug when plugging or unplugging the power cord. < iPod dock is not supplied for this unit. C VIDEO OUT terminal This terminal outputs video signal from iPod. Use a commercially available RCA pin video cable to connect the Dock to the composite video connector of a television or monitor. 9